Hi Bjorn,
On 2021/5/8 5:14, Bjorn Helgaas wrote:
On Fri, May 07, 2021 at 12:49:53PM +0000, Wang Xingang wrote:
From: Xingang Wang <wangxinga...@huawei.com>
When request ACS for PCI device in of_iommu_configure, the pci device
has already been scanned and added with 'pci_acs_enable=0'. So the
pci_request_acs() in current procedure does not work for enabling ACS.
Besides, the ACS should be enabled only if there's an IOMMU in system.
So this fix the call of pci_request_acs() and call pci_enable_acs() to
make sure ACS is enabled for the pci_device.
For consistency:
s/of_iommu_configure/of_iommu_configure()/
s/pci device/PCI device/
s/pci_device/PCI device/
But I'm confused about what problem this fixes. On x86, I think we
*do* set pci_acs_enable=1 in this path:
start_kernel
mm_init
mem_init
pci_iommu_alloc
p->detect()
detect_intel_iommu # IOMMU_INIT_POST(detect_intel_iommu)
pci_request_acs
pci_acs_enable = 1
before enumerating any PCI devices.
But you mentioned pci_host_common_probe(), which I think is mostly
used on non-x86 architectures, and I'm guessing those arches detect
the IOMMU differently.
I am testing on an arm architecture, and found that the ACS is enabled
properly when booting with ACPI. With ACPI enabled, x86 IOMMU is checked
when parsing DMAR, arm SMMU is checked when parsing IORT.
But when booting with devicetree, IOMMU is checked in
of_iommu_configure, and the pci_request_acs() is late at this time.
So my question is, can we figure out how to detect IOMMUs the same way
across all arches?
Thanks.
It would be better if there's a way to detect IOMMUs across all arches
and both for ACPI and DT.
Fixes: 6bf6c24720d33 ("iommu/of: Request ACS from the PCI core when
configuring IOMMU linkage")
Signed-off-by: Xingang Wang <wangxinga...@huawei.com>
---
drivers/iommu/of_iommu.c | 10 +++++++++-
drivers/pci/pci.c | 2 +-
include/linux/pci.h | 1 +
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index a9d2df001149..dc621861ae72 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -205,7 +205,6 @@ const struct iommu_ops *of_iommu_configure(struct device
*dev,
.np = master_np,
};
- pci_request_acs();
err = pci_for_each_dma_alias(to_pci_dev(dev),
of_pci_iommu_init, &info);
} else {
@@ -222,6 +221,15 @@ const struct iommu_ops *of_iommu_configure(struct device
*dev,
/* The fwspec pointer changed, read it again */
fwspec = dev_iommu_fwspec_get(dev);
ops = fwspec->ops;
+
+ /*
+ * If we found an IOMMU and the device is pci,
+ * make sure we enable ACS.
s/pci/PCI/ for consistency.
+ */
+ if (dev_is_pci(dev)) {
+ pci_request_acs();
+ pci_enable_acs(to_pci_dev(dev));
+ }
}
/*
* If we have reason to believe the IOMMU driver missed the initial
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b717680377a9..4e4f98ee2870 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -926,7 +926,7 @@ static void pci_std_enable_acs(struct pci_dev *dev)
* pci_enable_acs - enable ACS if hardware support it
* @dev: the PCI device
*/
-static void pci_enable_acs(struct pci_dev *dev)
+void pci_enable_acs(struct pci_dev *dev)
{
if (!pci_acs_enable)
goto disable_acs_redir;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c20211e59a57..e6a8bfbc9c98 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2223,6 +2223,7 @@ static inline struct pci_dev *pcie_find_root_port(struct
pci_dev *dev)
}
void pci_request_acs(void);
+void pci_enable_acs(struct pci_dev *dev);
bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
bool pci_acs_path_enabled(struct pci_dev *start,
struct pci_dev *end, u16 acs_flags);
--
2.19.1
.
Thanks
Xingang
.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
