From: Jon Nettleton <j...@solid-run.com>

Check if there is any RMR info associated with the devices behind
the SMMU and if any, install bypass SMRs for them. This is to
keep any ongoing traffic associated with these devices alive
when we enable/reset SMMU during probe().

Signed-off-by: Jon Nettleton <j...@solid-run.com>
Signed-off-by: Steven Price <steven.pr...@arm.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.th...@huawei.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu.c | 48 +++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c 
b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index f22dbeb1e510..e9fb3d962a86 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -2063,6 +2063,50 @@ err_reset_platform_ops: __maybe_unused;
        return err;
 }
 
+static void arm_smmu_rmr_install_bypass_smr(struct arm_smmu_device *smmu)
+{
+       struct list_head rmr_list;
+       struct iommu_resv_region *e;
+       int i, cnt = 0;
+       u32 reg;
+
+       INIT_LIST_HEAD(&rmr_list);
+       if (iommu_dma_get_rmrs(dev_fwnode(smmu->dev), &rmr_list))
+               return;
+
+       /*
+        * Rather than trying to look at existing mappings that
+        * are setup by the firmware and then invalidate the ones
+        * that do no have matching RMR entries, just disable the
+        * SMMU until it gets enabled again in the reset routine.
+        */
+       reg = arm_smmu_gr0_read(smmu, ARM_SMMU_GR0_sCR0);
+       reg &= ~ARM_SMMU_sCR0_CLIENTPD;
+       arm_smmu_gr0_write(smmu, ARM_SMMU_GR0_sCR0, reg);
+
+       list_for_each_entry(e, &rmr_list, list) {
+               u32 sid = e->fw_data.rmr.sid;
+
+               i = arm_smmu_find_sme(smmu, sid, ~0);
+               if (i < 0)
+                       continue;
+               if (smmu->s2crs[i].count == 0) {
+                       smmu->smrs[i].id = sid;
+                       smmu->smrs[i].mask = 0;
+                       smmu->smrs[i].valid = true;
+               }
+               smmu->s2crs[i].count++;
+               smmu->s2crs[i].type = S2CR_TYPE_BYPASS;
+               smmu->s2crs[i].privcfg = S2CR_PRIVCFG_DEFAULT;
+
+               cnt++;
+       }
+
+       dev_notice(smmu->dev, "\tpreserved %d boot mapping%s\n", cnt,
+                  cnt == 1 ? "" : "s");
+       iommu_dma_put_rmrs(dev_fwnode(smmu->dev), &rmr_list);
+}
+
 static int arm_smmu_device_probe(struct platform_device *pdev)
 {
        struct resource *res;
@@ -2189,6 +2233,10 @@ static int arm_smmu_device_probe(struct platform_device 
*pdev)
        }
 
        platform_set_drvdata(pdev, smmu);
+
+       /* Check for RMRs and install bypass SMRs if any */
+       arm_smmu_rmr_install_bypass_smr(smmu);
+
        arm_smmu_device_reset(smmu);
        arm_smmu_test_smr_masks(smmu);
 
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to