MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tf...@chromium.org>
Signed-off-by: Yong Wu <yong...@mediatek.com>
Tested-by: Dafna Hirschfeld <dafna.hirschf...@collabora.com> # on mt8173
---
 drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index a02dde094788..ee742900cf4b 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -571,22 +571,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct 
device *dev)
 {
        struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
        struct mtk_iommu_data *data;
+       struct device_link *link;
+       struct device *larbdev;
+       unsigned int larbid;
 
        if (!fwspec || fwspec->ops != &mtk_iommu_ops)
                return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
        data = dev_iommu_priv_get(dev);
 
+       /*
+        * Link the consumer device with the smi-larb device(supplier)
+        * The device in each a larb is a independent HW. thus only link
+        * one larb here.
+        */
+       larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+       larbdev = data->larb_imu[larbid].dev;
+       link = device_link_add(dev, larbdev,
+                              DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+       if (!link)
+               dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
        return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
        struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+       struct mtk_iommu_data *data;
+       struct device *larbdev;
+       unsigned int larbid;
 
        if (!fwspec || fwspec->ops != &mtk_iommu_ops)
                return;
 
+       data = dev_iommu_priv_get(dev);
+       larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+       larbdev = data->larb_imu[larbid].dev;
+       device_link_remove(dev, larbdev);
+
        iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index c259433f1130..806d4200665b 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -424,7 +424,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct 
device *dev)
        struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
        struct of_phandle_args iommu_spec;
        struct mtk_iommu_data *data;
-       int err, idx = 0;
+       int err, idx = 0, larbid;
+       struct device_link *link;
+       struct device *larbdev;
 
        /*
         * In the deferred case, free the existed fwspec if the dev already has,
@@ -454,6 +456,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct 
device *dev)
 
        data = dev_iommu_priv_get(dev);
 
+       /* Link the consumer device with the smi-larb device(supplier) */
+       larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+       larbdev = data->larb_imu[larbid].dev;
+       link = device_link_add(dev, larbdev,
+                              DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+       if (!link)
+               dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
        return &data->iommu;
 }
 
@@ -474,10 +484,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
        struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+       struct mtk_iommu_data *data;
+       struct device *larbdev;
+       unsigned int larbid;
 
        if (!fwspec || fwspec->ops != &mtk_iommu_ops)
                return;
 
+       data = dev_iommu_priv_get(dev);
+       larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+       larbdev = data->larb_imu[larbid].dev;
+       device_link_remove(dev, larbdev);
+
        iommu_fwspec_free(dev);
 }
 
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to