Em ter?a-feira, 12 de julho de 2016, ?s 12:35:22 PDT, Gregg Reynolds escreveu: > The Edison defaults to IPv4 on wlan0. Shouldn't that work? I finally > figured out how to make it use IPv6, but naturally cannot find a way to > make it go back to V4, or to run a dual stack.
The default behaviour should be to use dual stack and turn IPv6 on. IPv4 requires active configuration. Turning IPv6 off requires active configuration. > To complicate things, the gateway is connected by ethernet wire to my > wireless router, which is connected to my cable modem. So my devhost and my > Edison can connect wirelessly to the gateway, or to the router. So there's > a whole bunch of networking going on and I'm a long way from being a > network expert. Unfortunately, you need to do some network debugging to figure out what's happening. Please install wireshark or tcpdump on both your edison and your devhost and watch the packets. Do packets sent from one arrive on the other? Are they on the same subnet? Is your wireless router configured for "client isolation"? -- Thiago Macieira - thiago.macieira (AT) intel.com Software Architect - Intel Open Source Technology Center
