At 12:11 AM +0300 4/30/02, Gatis Gailis wrote:

>#/bin/sh!
>ifconfig ed0 | grep "inet " | awk '{ print $2 }'  /var/run/dynip
>
>3) executes a script that overwrites your dynamic address in ipf.rules with
>the contents of that dynip file and then 4) initializes ipfilter things.

Thanks for all the help everybody.  It looks like something similar 
to this is certainly the way to go.  Probably grab the ip address and 
use SED to swap it into my filter file and pipe it into ipf.

Thanks,
Rog


P.S.
For anybody interested, here are my plans for my filter rules.
I'm guessing that I'll have to initially load a basic set that allows 
DHCP to pass, then once I have an address, I can load the rest of the 
rules and allow everything else. right???

NetBSD 1.5.2
DHCP with dynamic DNS.
Hosting WWW and SMTP, and NAT'ing my home LAN.

# file /etc/ipf.conf
#
# Default policy Deny
     block in on ne1

# Anti-Spoofing
     block in log quick on ne1 from 192.168.0.0/16  to any  # Private net
     block in log quick on ne1 from 172.16.0.0/12   to any  # Private net
     block in log quick on ne1 from 10.0.0.0/8      to any  # Private net
     block in log quick on ne1 from 127.0.0.0/8     to any  # Local net
     block in log quick on ne1 from 0.0.0.0/8       to any  # Unused
     block in log quick on ne1 from 169.254.0.0/16  to any  # Autoconfig systems
     block in log quick on ne1 from 192.0.2.0/24    to any  # Reserved 
example IP block
     block in log quick on ne1 from 204.152.64.0/23 to any  # Reserved by Sun
     block in log quick on ne1 from 224.0.0.0/3     to any  # Class 
D&E Multicast

# Give internal net full access
     pass  out    quick on ne1 proto tcp/udp from 192.168.0.0/24 to 
any  keep state
     pass  out    quick on ne1 proto icmp    from 192.168.0.0/24 to 
any  keep state

# Uncomment to allow a subset of ICMP requests
#   pass  in     quick on ne1 proto icmp from any to $myip icmp-type 
0  # echo reply (ping)
#   pass  in     quick on ne1 proto icmp from any to $myip icmp-type 
3  # destination unreachable
#   pass  in     quick on ne1 proto icmp from any to $myip icmp-type 
4  # source quench
#   pass  in     quick on ne1 proto icmp from any to $myip icmp-type 
5  # redirect message
#   pass  in     quick on ne1 proto icmp from any to $myip icmp-type 
8  # echo request (ping)
#   pass  in     quick on ne1 proto icmp from any to $myip icmp-type 
11 # time exceeded (traceroute)

# Otherwise, block all icmp.
     block in log quick on ne1 proto icmp from any to any

# Finally, allow access to our SSH, SMTP and HTTP Servers
     pass  in     quick on ne1 proto tcp  from $ok-host  to $myip port 
= 22  flags S  keep state
     pass  in     quick on ne1 proto tcp  from any       to $myip port 
= 25  flags S  keep state
     pass  in     quick on ne1 proto tcp  from any       to $myip port 
= 80  flags S  keep state
# Do I need to allow 67/68 since I allow full internal access first?
#   pass  in log quick on ne1 proto udp  from $dhcpserver port = 67 
to any port = 68 keep state

# Throw off casual snoopers.
     block return-rst in log    proto tcp  from any      to $myip port = 21
     block return-rst in log    proto tcp  from any      to $myip port = 22
     block return-rst in log    proto tcp  from any      to $myip port = 23
     block return-rst in log    proto tcp  from any      to $myip port = 53
     block return-rst in log    proto tcp  from any      to $myip port = 443
     block return-rst in log    proto tcp  from any      to $myip port = 445
     block return-rst in log    proto tcp  from any      to $myip port = 515
# Maybe I can replace the above rules with this one?
#   block return-rst in log on ne1 proto tcp all flags S/SA  #does this work?

#   block return-icmp-as-dest(port-unr) in log quick on ne1 proto udp 
from any to $myip port = 111
#   block return-icmp-as-dest(port-unr) in log       on ne1 proto  udp all
#   block return-icmp-as-dest(port-unr) in log       on ne1 proto icmp all

Reply via email to