Hello community,

This is my first post, and here comes my question i puzzle on since
long:

I got a Cable modem connection and an ADSL router connection that i want
to put together on one Solaris 8 box with IPF v3.4.27 (496) to route to
the local private network. So far no problem, when the outside
connections wouldn't have different route counts:

                 NAT     --------Cable modem ------------- IN
                /  217.x.x.x/16 dyn
--- IPFilter <
192.168.2.1/24  \       192.168.1.1/24    NAT      217.8.x.x/32 fix
          192.168.1.2/24 --------ADSL router ------------- IN

On routing through these two different lines, both configured as default
gateways on the filter machine, routed collects routes with different
costs, in general the route through ADSL has one hop more, as it is a
router, where NAT is running. Sure, that pretty quick the system gets
confused.

I don't want to configure the lines to serve different
machines/services, but make it a load-balanced system. To eliminate the
router function on ADSL and let the IPFilter box do the PPPoe work was
an idea i had already, but it is rather complicated to make real, so my
question is, if there isn't a way to add an additional route cost unit
to routes going through Cable modem, so that routed treats both routes
equally? Or another magic i wouldn't have dared to think about till now?

Any comments/help is very much appreciated, thanks a lot,

Cheers, Frank

Reply via email to