Steve Clark wrote:
Hello,
Currently I have the following nat rule:
map eth1 from 192.168.4.0/24 ! to 192.168.10.0/24 -> 10.0.129.150/32 portmap
tcp/udp 40000:60000
which nats everything coming from the 192.168.4.0/24 network unless it is going
to the 192.168.10.0/24
network.
Is there a way to specify an additional destination ip address range that is
not to be natted, something like:
map eth1 from 192.168.4.0/24 ! to ( 192.168.10.0/24 or 176.16.0.0/16 ) ->
10.0.129.150/32 portmap tcp/udp 40000:60000
Thanks,
Steve
Hmmm....
I guess since no one responded this is not doable with ipfilter or it is so
obvious people think I am
a troll.
Regards,
Steve
