Just a thought.. would MOBIKE be any use here? At least one would be able to move the SeGWs on fly (assuming the source and destination SeGW are able to share required information between each other).
- Jouni On May 5, 2014, at 3:45 PM, Ahmad Muhanna wrote: > Hi Vijay, > > Please see comments inline. > > On Mon, May 5, 2014 at 12:30 AM, vijay kn <vijay...@huawei.com> wrote: > Hi Ahmad, > > If you meant re-negotiating is IKEv2 rekey then it will not work because > IKEv2 rekey will not send any IKE_SA_INIT packet. As of now, the RFC says > that REDIRECT_SUPPORTED payload can be sent only in IKE_SA_INIT msg. > > OR > > If you meant re-negotiating is completely delete the current SA and > re-negotiate the SA from scratch, this would lead to service loss/pkt loss. > > > > [Ahmad] > Yes. I meant the later. > > If we look at all scenarios that could be applicable to what you are trying > to solve, one end of the IKE SA needs to be upgraded to support REDIRECTION. > In my experience, that always happens in a controlled environment (i.e., a > maintenance window). In addition, operators do this kind of activity very > carefully and NOT globally; meaning, they upgrade a limited number of nodes > at a time or during a specific period. > > The fact that the client and the SeGW -OR- the peers are from different > vendors or even in different operator domains for the sake of making this > more complex, it is always the case that when a new functionality is > introduced, there is an expectation of service interruption. > > NOW: even if we allow this feature as part of this RFC, there is still no > guarantee for the functionality to be successfully negotiated using the > proposed solution. Because that will introduce another level of complexity > and other backward compatibility scenarios that need to be considered when > one of the peers support this functionality and the other does not. > > For example: what about if the SeGW support REDIRECTION as per RFC5685 but > NOT by the newly introduced functionality (assuming that has been adopted). > Although, the SeGW support REDIRECTION, but it would NOT be able to recognize > and support this functionality. This means that it wont work but > renegotiation of the IKE SA will still work. > > IMO, what you are trying to do is a completely new feature that is not in the > scope of this RFC and that is why I said this RFC does not need to be updated > or changed. I believe what you are trying to do is some kind of dynamic > mechanism that allow one peer to check with the other peer on what kind of > functionality it supports vs. what it does NOT support with some forward > compatibility in mind. > That is totally and completely different than this RFC and can be applicable > to many other scenarios and RFCs other than this one. > > I hope I am making sense. > > Regards, > Ahmad > > > Recommendation: - > > Since the base stations normally establish Tunnel with other vendor base > stations and/or other vendor Gateways which may or may not support REDIRECT, > it is better to add this solution (client to send a new INFO msg with the > REDIRECT_SUPPORTED notify payload) to enable a SMOOTH inter-op with other > vendor implementations. > > > > Because of these reasons, I feel the RFC needs correction. > > > > > > From: Ahmad Muhanna [mailto:asmuha...@gmail.com] > Sent: Sunday, May 04, 2014 9:41 PM > To: vijay kn > Cc: vi...@wichorus.com; kilian.weni...@googlemail.com; ipsec@ietf.org; > vjkumar2...@gmail.com > Subject: Re: [IPsec] Regarding IKEv2 REDIRECT problem (reference RFC 5685) > > > > Hi, Vijay, > > > > I am NOT one if the authors of this RFC but I recall the discussion and the > use case. If I understand the scenario correctly, the client in this case > (eNB) negotiated an IKE SA without indicating the ability to support > REDIRECT. If that is the case, the client should renegotiate IKE SA after > being upgraded to support this functionality. My understanding renegotiating > IKE SA is supported. > > > > IMO, I do not think that anything in this RFC needs to be changed. > > > Regards, > > Ahmad Muhanna > > > On May 2, 2014, at 9:14 AM, vijay kn <vijay...@huawei.com> wrote: > > Hi, > > There is an issue in IKEv2 REDIRECT RFC 5685. In one scenario, the IKEv2 > REDIRECT will not work indefinitely. > > > > Scenario: - > > Let’s assume there are about 1000 clients connected to a IKEv2 REDIRECT > enabled SeGW. None of the clients were IKEv2 redirect enabled at the time of > establishing SA with the SeGW (meaning they have not sent the > REDIRECT_SUPPORTED notification in the > > IKE_SA_INIT message) > > This will lead to a situation where the SeGW is loaded and wanting to > redirect some clients to another SeGW but it cannot REDIRECT them as none of > them have indicated REDIRECT support in the IKE_SA_INIT message. > > If the user/operator enabled REDIRECT functionality dynamically (like after > SAs were established), then the SeGW is not going to redirect them because it > had not received a REDIRECT_SUPPORTED payload from the clients. > > > > Effect/Impact: - > > This leads to a congestion/overload at the gateway when the base stations > connecting to the SeGW are several hundred/thousands in number. In the LTE > and LTE-A scenarios, this condition is possible where the number of base > stations connecting to the SeGW are very high. > > > > Suggestion/Solution: - > > A change is required in RFC 5685 is required as below: - > > “”Whenever the redirect feature/functionality is enabled at run-time, the > client should indicate the same to the SeGW. This can be done by the client > sending an INFORMATIONAL message under the protection of the IKE SA. This > message MUST have a REDIRECT_SUPPORTED notify payload to enable the SeGW to > redirect them at run-time even though they had initially connected with SeGW > without REDIRECT support”” > > > > Request for comments: - > > Please read the problem, impact and solution listed above and let me know if > any comments. Hope my point is valid and needs to be incorporated as the RFC > update. > > > > > > Regards, > > Vijay N. > > > > _______________________________________________ > IPsec mailing list > IPsec@ietf.org > https://www.ietf.org/mailman/listinfo/ipsec > > > > > -- > Regards, > Ahmad > _______________________________________________ > IPsec mailing list > IPsec@ietf.org > https://www.ietf.org/mailman/listinfo/ipsec _______________________________________________ IPsec mailing list IPsec@ietf.org https://www.ietf.org/mailman/listinfo/ipsec