Hallo, Sebastian Niehaus schrieb:
> Offenbar stelle ich mich zu blöd an, IPv6 über PPP zu betreiben. Titan > Networks stellt mir einen IPv6-only Zugang bereit (deshalb ist die > pppd-Option "noip" gesetzt) BTW: kann ich auch einen Account zum Testen bekommen? > Der Start der Verbindung läuft wie folgt ab: > > > ,---- > | [EMAIL PROTECTED]:/home/niehaus# pon dsl-titan > | using channel 28 > | Using interface ppp0 > | Connect: ppp0 <--> /dev/pts/4 > | sent [LCP ConfReq id=0x1 <mru 1456> <asyncmap 0x0> <magic 0x1ead54f2> > <pcomp> <accomp>] > | rcvd [LCP ConfReq id=0x1 <mru 1492> <auth pap> <magic 0xc26e839a>] > | sent [LCP ConfAck id=0x1 <mru 1492> <auth pap> <magic 0xc26e839a>] > | rcvd [LCP ConfNak id=0x1 <mru 1492>] > | sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x1ead54f2> > <pcomp> <accomp>] > | rcvd [LCP ConfAck id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x1ead54f2> > <pcomp> <accomp>] > | sent [LCP EchoReq id=0x0 magic=0x1ead54f2] > | sent [PAP AuthReq id=0x1 user="username" password=<hidden>] > | rcvd [LCP EchoRep id=0x0 magic=0xc26e839a 00 63 30 75] > | rcvd [LCP ConfReq id=0x1 <mru 1492> <auth chap MD5> <magic 0xd84e5dc3> > <mrru 1524> <endpoint [local:61.64.73.6c.67.77.30.30]>] > | sent [LCP ConfReq id=0x3 <mru 1456> <asyncmap 0x0> <magic 0x3a1a0331> > <pcomp> <accomp>] > | sent [LCP ConfRej id=0x1 <mrru 1524>] > | rcvd [LCP ConfNak id=0x3 <mru 1492>] > | sent [LCP ConfReq id=0x4 <mru 1492> <asyncmap 0x0> <magic 0x3a1a0331> > <pcomp> <accomp>] > | rcvd [LCP ConfReq id=0x2 <mru 1492> <auth chap MD5> <magic 0xd84e5dc3> > <endpoint [local:61.64.73.6c.67.77.30.30]>] > | sent [LCP ConfAck id=0x2 <mru 1492> <auth chap MD5> <magic 0xd84e5dc3> > <endpoint [local:61.64.73.6c.67.77.30.30]>] > | rcvd [LCP ConfAck id=0x4 <mru 1492> <asyncmap 0x0> <magic 0x3a1a0331> > <pcomp> <accomp>] > | sent [LCP EchoReq id=0x0 magic=0x3a1a0331] > | rcvd [CHAP Challenge id=0x1 <6d333cc1f7f7bb582d50c21ad5d106d5>, name = > "adslgw00"] > | sent [CHAP Response id=0x1 <57c3cb001ccd3a0cd39da9cfd3a15eb5>, name = > "username"] > | rcvd [LCP EchoRep id=0x0 magic=0xd84e5dc3] > | rcvd [CHAP Success id=0x1 ""] > | CHAP authentication succeeded > | sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] > | sent [IPV6CP ConfReq id=0x1 <addr fe80::c561:2635:dc73:7ee3>] > | rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 217.173.128.53>] > | Unsupported protocol 'Internet Protocol Control Protocol' (0x8021) received > | sent [LCP ProtRej id=0x5 80 21 01 01 00 10 02 06 00 2d 0f 00 03 06 d9 ad 80 > 35] > | rcvd [IPV6CP ConfReq id=0x1 <addr fe80::02d0:bcff:fefb:bc00>] > | sent [IPV6CP ConfAck id=0x1 <addr fe80::02d0:bcff:fefb:bc00>] > | rcvd [LCP ProtRej id=0x3 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f > 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 ...] > | Protocol-Reject for 'Compression Control Protocol' (0x80fd) received > | rcvd [IPV6CP ConfAck id=0x1 <addr fe80::c561:2635:dc73:7ee3>] > | local LL address fe80::c561:2635:dc73:7ee3 > | remote LL address fe80::02d0:bcff:fefb:bc00 > | Script /etc/ppp/ipv6-up started (pid 22965) > | Script /etc/ppp/ipv6-up finished (pid 22965), status = 0x0 > `---- > > > Sieht irgendwie gut aus, die local LL address kann ich mit > > | ping6 -I eth0 Du meinst wohl -I ppp0 - oder? > > erreichen, die remote LL address hingegen nicht. Versuchst Du die auch mit ping6 -I ppp0 zu erreichen? Schau mal, was Du mit tcpdump siehst. > Die Ausgabe von "ifconfig ppp0" sieht verdächtig nach dem aus, was ich > laut > http://www.deepspace6.net/projects/initscripts-ipv6.html#id2867720 zu > erwarten habe, lediglich die IPv4-Adressen fehlen. Klar, da ich kein > IPv4 bekomme habe ich die mit der pppd-Option "noip" abgeschaltet. BTW: interessant ist, wie Du eine globale IPv6-Adresse erhälst...senden die RAs aus oder mußt Du DHCPv6 konfiguieren? Denn in IPV6CP ist (anders als bei IPCP) nichts von wegen Zuweisung einer globalen Adresse oder eines Prefix definiert. > ,---- > | [EMAIL PROTECTED]:/home/niehaus# ifconfig ppp0 > | ppp0 Link encap:Point-to-Point Protocol > | inet6 addr: fe80::c561:2635:dc73:7ee3/10 Scope:Link > | UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1456 Metric:1 > | RX packets:3 errors:0 dropped:0 overruns:0 frame:0 > | TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 > | collisions:0 txqueuelen:3 > | RX bytes:44 (44.0 b) TX bytes:187 (187.0 b) > `---- Also ich würde sagen, der Link funktioniert, sonst würdest Du keine RX-Counts haben. > Hat jemand Ideen, was ich falsch mache (laufendes IPv4 ist doch wohl > keine Voraussetzung für den pppd, oder? S.o. Peter -- Dr. Peter Bieringer http://www.bieringer.de/pb/ GPG/PGP Key 0x958F422D mailto:[EMAIL PROTECTED] Deep Space 6 Co-Founder and Core Member http://www.deepspace6.net/ _______________________________________________ ipv6 mailing list [email protected] http://listserv.uni-muenster.de/mailman/listinfo/ipv6
