Hi all, besides some other, I have these ipsec routes on my (routing) CARPed tunnel endpoint pair (netstat -rn): -------- Encap: Source Port Destination Port Proto SA(Address/Proto/Type/Direction) ... default 0 2001:1234:2:10::/60 0 0 1.2.3.40/ esp/use/in 2001:1234:2:10::/60 0 default 0 0 1.2.3.40/ esp/require/out ... -------- How can I announce this as ipv6 default route in the connected nets (some /64 subnets from the above /60)? I have tried route6d and ospf6d without success. My ipv6 sysctls are: -------- net.inet6.ip6.forwarding=1 net.inet6.ip6.redirect=1 net.inet6.ip6.hlim=64 net.inet6.ip6.mrtproto=103 net.inet6.ip6.maxfragpackets=200 net.inet6.ip6.accept_rtadv=0 net.inet6.ip6.keepfaith=0 net.inet6.ip6.log_interval=5 net.inet6.ip6.hdrnestlimit=10 net.inet6.ip6.dad_count=1 net.inet6.ip6.auto_flowlabel=1 net.inet6.ip6.defmcasthlim=1 net.inet6.ip6.kame_version=OpenBSD-current net.inet6.ip6.use_deprecated=1 net.inet6.ip6.rr_prune=5 net.inet6.ip6.v6only=1 net.inet6.ip6.maxfrags=200 net.inet6.ip6.mforwarding=0 net.inet6.ip6.multipath=0 net.inet6.ip6.multicast_mtudisc=0 net.inet6.ip6.neighborgcthresh=2048 net.inet6.ip6.maxifprefixes=16 net.inet6.ip6.maxifdefrouters=16 net.inet6.ip6.maxdynroutes=4096 net.inet6.ip6.dad_pending=0 net.inet6.icmp6.rediraccept=1 net.inet6.icmp6.redirtimeout=600 net.inet6.icmp6.nd6_prune=1 net.inet6.icmp6.nd6_delay=5 net.inet6.icmp6.nd6_umaxtries=3 net.inet6.icmp6.nd6_mmaxtries=3 net.inet6.icmp6.nd6_useloopback=1 net.inet6.icmp6.nodeinfo=1 net.inet6.icmp6.errppslimit=100 net.inet6.icmp6.nd6_maxnudhint=0 net.inet6.icmp6.mtudisc_hiwat=1280 net.inet6.icmp6.mtudisc_lowat=256 net.inet6.icmp6.nd6_debug=0 net.inet6.divert.recvspace=65636 net.inet6.divert.sendspace=65636 -------- This is 4.8 stable on i386.
Any help welcome, Axel --- [email protected] PGP-Key:29E99DD6 +49 151 2300 9283 computing @ chaos claudius
