Hi, I tried to boot an imac mid.2011 (22.5inch 16/9) today with iPXE using your ISO. I have this error it sees two network adapters (net0 and net1), but can't obtain "link up". Both mac adresses for net0 and net1 are correctly detected when typing a "config" in the iPXE CLI... But no nor gateway IP (nothing but mac adress, in fact) is attributed via DHCP.
Note that i have tried that same CD (burned with the iPXE iso) onto a Dell optiplex 740, and it PXE booted successfully the first time after it's network card was detected. Your website gives this info at URL : http://ipxe.org/err/4c1f6035 Error: Connection timed out (Error number 0x4c1f6035) Possible sources This error originated from one of the following locations within the iPXE source code: net/80211/net80211.c (line 1376) net/80211/net80211.c (line 1675) net/80211/net80211.c (line 1720) Thank you very much for your hard work. i have more than 120 imacs mid.2011 to duplicate via multicast. Pain in the ass if i can't use my DRBL server... ;( ;( Thanks again. Emmanuel. _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
