I am trying to install Rhel to system using PXE. We have a shelf and there are 16 blades on it. One of these set the network address informations and these all blades normally have 5 eth port and eth0 and eth1 are alwasy used for base Network and installation and communication between blades are complete from these interfaces. When we set pxe server and restart the blade it starts the system from DHCP with ..:..:a2(eth0) and ..:..:a3(eth1) MAC addresses. However, ipxe or Rhel anaconda show us the MAC addresses as ..:..:a4(eth1) and ..:..:a5(eth1). For this reason system can not continue to installation because of wrong MAC addresses.
Volkan, -----Original Message----- From: Michael Brown [mailto:[email protected]] Sent: Friday, July 20, 2012 4:33 PM To: [email protected] Cc: Volkan BULBUL Subject: Re: [ipxe-devel] Rhel Wrong Mac address problem On Friday 20 Jul 2012 12:35:44 Volkan BULBUL wrote: > Actualy when i using ipxe i run "reboot" command and system is down and > does not work now. However, I was took a capture before it borken down? > Is that a bug, why system is broken down ? It seems more likely that you are doing something wrong. If you can be _much_ more precise about what you're doing and what the problem really is, then someone might be able to help you. Michael Bu e-posta mesajı ve ekleri gönderildiği kişi ya da kuruma özeldir ve gizlidir. Ayrıca hukuken de gizli olabilir. Hiçbir şekilde üçüncü kişilere açıklanamaz ve yayınlanamaz. Eğer mesajın gönderildiği alıcı değilseniz bu elektronik postanın içeriğini açıklamanız, kopyalamanız, yönlendirmeniz ve kullanmanız kesinlikle yasaktır ve bu elektronik postayı ve eklerini derhal silmeniz gerekmektedir. NETAŞ TELEKOMÜNİKASYON A.Ş. bu mesajın içerdiği bilgilerin doğruluğu veya eksiksiz olduğu konusunda herhangi bir garanti vermemektedir. Bu nedenle bu bilgilerin ne şekilde olursa olsun içeriğinden, iletilmesinden, alınmasından, saklanmasından ve kullanılmasından sorumlu değildir. Bu mesajdaki görüşler gönderen kişiye ait olup, NETAŞ TELEKOMÜNİKASYON A.Ş.’nin görüşlerini yansıtmayabilir. This e-mail and its attachments are private and confidential and intended for the exclusive use of the individual or entity to whom it is addressed. It may also be legally confidential. Any disclosure, distribution or other dissemination of this message to any third party is strictly prohibited. If you are not the intended recipient you are hereby notified that any dissemination, forwarding, copying or use of any of the information is strictly prohibited, and the e-mail should immediately be deleted. NETAŞ TELEKOMÜNİKASYON A.Ş. makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the transmission, reception, storage or use of such information in any way whatsoever. The opinions expressed in this message are those of the sender and may not necessarily reflect the opinions of NETAŞ TELEKOMÜNİKASYON A.Ş. _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
