Hello, We are using iPXE for about four month now. We have new models of computers, so we need to recompile a new version of iPXE to handle them.
We used the same method and same script as before, but now we got an error "Invalid magic signature". Is there new restriction with newer version of iPXE? Our scripts are attached to this mail. undionly.kpxe is embed with a script to chain to another script on our webserver. https certificate is included. general.h is modified to handle https. This script (boot.php) do a login and chain to the main script (menu.php) who show a menu depending on user rights. With old version, no problem, everthing is working. With new version, the script start, and just after login we got the error. To detect the error, we had to add DEBUG=script in the kernel. Can you help us solving this problem? Thank you very much! Christian Bovey CHUV centre hospitalier universitaire vaudois Christian BOVEY - Gestion des interventions Direction des systèmes d'informations | SSI Bureau BU21/05 /010 Rue du Bugnon 21, CH-1011 Lausanne +41 (0)21 314 6999 TEL [email protected]<mailto:[email protected]> www.chuv.ch<http://www.chuv.ch/>
<<attachment: menu.php>>
<<attachment: boot.php>>
webserveur_https.ipxe
Description: webserveur_https.ipxe
#ifndef CONFIG_GENERAL_H
#define CONFIG_GENERAL_H
/** @file
*
* General configuration
*
*/
FILE_LICENCE ( GPL2_OR_LATER );
#include <config/defaults.h>
/*
* Branding
*
* Vendors may use these strings to add their own branding to iPXE.
* PRODUCT_NAME is displayed prior to any iPXE branding in startup
* messages, and PRODUCT_SHORT_NAME is used where a brief product
* label is required (e.g. in BIOS boot selection menus).
*
* To minimise end-user confusion, it's probably a good idea to either
* make PRODUCT_SHORT_NAME a substring of PRODUCT_NAME or leave it as
* "iPXE".
*
*/
#define PRODUCT_NAME "CHUV - iPXE - Outils reseaux v1.01"
#define PRODUCT_SHORT_NAME "iPXE_CHUV_0101"
/*
* Timer configuration
*
*/
#define BANNER_TIMEOUT 20 /* Tenths of a second for which the shell
banner should appear */
/*
* Network protocols
*
*/
#define NET_PROTO_IPV4 /* IPv4 protocol */
#undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */
/*
* PXE support
*
*/
//#undef PXE_STACK /* PXE stack in iPXE - you want this! */
//#undef PXE_MENU /* PXE menu booting */
/*
* Download protocols
*
*/
#define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */
#define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */
#define DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */
#undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */
#undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */
/*
* SAN boot protocols
*
*/
//#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */
//#undef SANBOOT_PROTO_AOE /* AoE protocol */
//#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */
//#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */
/*
* 802.11 cryptosystems and handshaking protocols
*
*/
#define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */
#define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase
*/
#define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */
/*
* Name resolution modules
*
*/
#define DNS_RESOLVER /* DNS resolver */
/*
* Image types
*
* Etherboot supports various image formats. Select whichever ones
* you want to use.
*
*/
//#define IMAGE_NBI /* NBI image support */
//#define IMAGE_ELF /* ELF image support */
//#define IMAGE_MULTIBOOT /* MultiBoot image support */
//#define IMAGE_PXE /* PXE image support */
//#define IMAGE_SCRIPT /* iPXE script image support */
//#define IMAGE_BZIMAGE /* Linux bzImage image support */
//#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */
//#define IMAGE_EFI /* EFI image support */
/*
* Command-line commands to include
*
*/
#define AUTOBOOT_CMD /* Automatic booting */
#define NVO_CMD /* Non-volatile option storage commands */
#define CONFIG_CMD /* Option configuration console */
#define IFMGMT_CMD /* Interface management commands */
#define IWMGMT_CMD /* Wireless interface management commands */
#define FCMGMT_CMD /* Fibre Channel management commands */
#define ROUTE_CMD /* Routing table management commands */
#define IMAGE_CMD /* Image management commands */
#define DHCP_CMD /* DHCP management commands */
#define SANBOOT_CMD /* SAN boot commands */
#define MENU_CMD /* Menu commands */
#define LOGIN_CMD /* Login command */
#define SYNC_CMD /* Sync command */
#define TIME_CMD /* Time commands */
//#define DIGEST_CMD /* Image crypto digest commands */
//#define LOTEST_CMD /* Loopback testing commands */
//#define VLAN_CMD /* VLAN commands */
//#define PXE_CMD /* PXE commands */
#define REBOOT_CMD /* Reboot command */
//#define IMAGE_TRUST_CMD /* Image trust management commands */
/*
* ROM-specific options
*
*/
#undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */
/*
* Error message tables to include
*
*/
#undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */
/*
* Obscure configuration options
*
* You probably don't need to touch these.
*
*/
#define NETDEV_DISCARD_RATE 0 /* Drop every N packets (0=>no drop) */
#undef BUILD_SERIAL /* Include an automatic build serial
* number. Add "bs" to the list of
* make targets. For example:
* "make bin/rtl8139.dsk bs" */
#undef BUILD_ID /* Include a custom build ID string,
* e.g "test-foo" */
#undef NULL_TRAP /* Attempt to catch NULL function calls */
#undef GDBSERIAL /* Remote GDB debugging over serial */
#undef GDBUDP /* Remote GDB debugging over UDP
* (both may be set) */
#include <config/local/general.h>
#endif /* CONFIG_GENERAL_H */
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
