by working in kvm serial I mean no double characters but arrow keys still don't work.
On 22 April 2014 06:30, Peter Pickford <[email protected]> wrote: > I see double characters when using kvm serial with fifos enabled. Perhaps > kvm serial emulation don't work too well with some options. > > kvm serial seems distractingly slow in ipxe in polling mode- type a char > and wait sort of slow - reminds me of 300 baud Teletype or worse, but it > works :) > > I also saw problems with arch install in kvm over serial perhaps grub has > the same issues though I don't know if its some sort of config problem as > it it may be outputting to two console or some such and combining the > output hence the two characters. > > I will test a clean build later and let you know > > The cpu and power usage is quite important in virtual environments as it > can use resources that other vms could benefit from if they boot to an ipxe > screen and just sit there using cpu and power etc > > > On 22 April 2014 06:05, Michael Brown <[email protected]> wrote: > >> On 17/04/14 15:24, Peter Pickford wrote: >> >>> values to tried all seem to work >>> 0x01 enable fifos only (this is probably enough) >>> >> >> I've pushed a change with the minimal fix of just enabling the FIFOs: >> >> http://git.ipxe.org/ipxe.git/commitdiff/d644ad4 >> >> Please let me know if there are still problems with escape sequences via >> the serial port. >> >> Michael >> > >
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
