On 23.06.2014 22:06, Bain.John wrote: > For the last while I have been using pxelinux to launch wimboot 1.0.4 > to boot my windows deployment built with WinPe 4.0 > > Recently however I have upgraded my deployment and am now using WinPE > 5.1 . Using my old configuration, I’ve upgraded wimboot to 1.0.6 , I > have copied over my new boot files and I am still not able to boot into > WinPE 5.1 > > This is what my configuration looks like. > > /label engref2/ > /menu label Engref2/ > /com32 linux.c32/ > /append wimboot / > /initrdfile=http://192.168.1.1/engref2_bin/bootmgr,http://192.168.1.1/engref2_bin/boot/bcd,http://192.168.1.1/engref2_bin/boot/fonts/segmono_boot.ttf,http://192.168.1.1/engref2_bin/boot/fonts/segoe_slboot.ttf,http://192.168.1.1/engref2_bin/boot/fonts/segoen_slboot.ttf,http://192.168.1.1/engref2_bin/boot/fonts/wgl4_boot.ttf,http://192.168.1.1/engref2_bin/boot/boot.sdi,http://192.168.1.1/engref2_bin/boot/boot.wim/ > > This configuration use to work in WinPE 4 but no longer in WinPE 5.1
Have you tried using a plain iPXE script to load WinPE 5.1 (that's based on Windows 8.1, right)? Syslinux didn't have the initrd auto-wrapping feature earlier, but if you're saying that the above config was working earlier I'm assuming you have Shao's patch installed and working. If an iPXE script is working in loading it properly, then you'll need to get into debugging how the initrd files are loaded, which I assume is probably your culprit. -- Robin _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel