Hi Floris, be sure, that your dhcp-server offers dns-namesrver via dhcp-6 option. Ive got problems with name-resolution, too. In my case it was the better way to send correct netbios-server via dhcp-44 option for name-resolution.
Additionally, i miss the "dhcp" keyword on your ipxe-setup. Hth, Oliver Am 28.10.2014 um 23:43 schrieb Floris Bos: > Hi, > > I am having problems getting a Windows 2012 iSCSI installation to work > with recent iPXE versions, > while it does work with an older iPXE version. > > > Test setup: > > - Virtualbox VM as "server to be provisioned" > - Simple Synology NAS device as iSCSI target > - Latest wimboot > - iPXE script that looks like this: > > == > set keep-san 1 > set skip-san-boot 1 > sanboot > iscsi:192.168.178.99::3260::iqn.2000-01.com.synology:DiskStation.diskless > kernel http://192.168.178.100/wimboot > initrd http://192.168.178.100/bootmgr bootmgr > initrd http://192.168.178.100/bcd bcd > initrd http://192.168.178.100/boot.sdi boot.sdi > initrd http://192.168.178.100/segmono_boot.ttf segmono_boot.ttf > initrd http://192.168.178.100/segoe_slboot.ttf segoe_slboot.ttf > initrd http://192.168.178.100/wgl4_boot.ttf wgl4_boot.ttf > initrd http://192.168.178.100/boot.wim boot.wim > boot > == > > With undionly.kkpxe compiled today from git sources: > > Windows does not detect the iSCSI disk and network configuration is > not entirely correct. > Seems Windows was able to obtain the IPv4 IP-address, but not my IPv4 > nameserver from iBFT. > > Screenshot of ipconfig/diskpart "show disk": > http://s29.postimg.org/s8eyhb78n/ipxe_2014.png > > > > > With an old undionly.kkpxe I compiled back in September 2012, and > everything else the same, it does works correctly. > > Screenshot: http://s22.postimg.org/hg17r5ug1/ipxe_2012.png > > > Any idea what might be the issue? > _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
