I get the message: Could not open SAN device: Operation not supported http://ipxe.org/3c092003
It used to work in older versions of ipxe My setup: Parallels Desktop 10.3.0 virtual machine running on OS X. Booting via virtual floppy disk compiled as make bin/ipxe.dsk. NFS disk mounted on /Volumes/FreeBSD-NFS on OS X. Booting FreeBSD 9.3 with this ISC dhcpd config: ########## host pallipxe { hardware ethernet 00:1c:42:9c:d3:1c; fixed-address 192.168.0.99; next-server 192.168.0.2; filename "pxeboot"; option root-path "192.168.0.2:/Volumes/FreeBSD-NFS"; } ########### I also have an ancient PC, which is so old it does not have PXE in rom. I try to boot FreeBSD as above, with a similar configuration, with ipxe loaded via a hard drive partition compiled as make bin/ipxe.hd It does not work there either. I have bisected this error. The first bad commit is 53d2d9e3c37d6 I would like ipxe to pass the root-path unmodified to FreeBSD's pxeboot program instead of treating it like the root of a SAN disk. _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel