I guys I have the issue, that my ipxe Image is not loading. With a earlier version it worked like a charm on a (Pc Engines APU). But since 1-3 months not anymore. I’m trying to boot Coreboot (SeaBIOS) including a customized ipxe. It worked perfectly about 3 months ago with a «Pc Engines APU» board. But not with a «Pc Engines Alix 2d».
Thank you in advance. I have modified bootorder as follows: Bootorder file: /rom@genroms/ipxe /pci@i0cf8/*@11/drive@0/disk@0 /pci@i0cf8/*@11/drive@1/disk@0 I did added to the coreboot.rom the following: $COREBOOT_DIRECTORY/build/cbfstool build/coreboot.rom add -f ./bootorder -n bootorder -t raw $COREBOOT_DIRECTORY/build/cbfstool build/coreboot.rom add -f ./payloads/perso/ipxe/src/bin/11063053.rom -n genroms/ipxe -t raw The last lines on the console Output are as follows: IMD small region: IMD ROOT 0. 0f7dec00 00000400 GDT 1. 0f7dea00 00000200 BS: BS_WRITE_TABLES times (us): entry 0 run 1189750 exit 0 CBFS: 'Master Header Locator' located CBFS at [100:7ffc0) CBFS: Locating 'fallback/payload' CBFS: Found @ offset da80 size 1bfd8 Loading segment from rom address 0xfff8dbb8 code (compression=0) New segment dstaddr 0xe4060 memsize 0x1bfa0 srcaddr 0xfff8dbf0 filesize 0x1bfa0 Loading segment from rom address 0xfff8dbd4 Entry Point 0x000ff06e Bounce Buffer at 0f73d000, 485264 bytes Loading Segment: addr: 0x00000000000e4060 memsz: 0x000000000001bfa0 filesz: 0x000000000001bfa0 lb: [0x0000000000100000, 0x000000000013b3c8) Post relocation: addr: 0x00000000000e4060 memsz: 0x000000000001bfa0 filesz: 0x000000000001bfa0 it's not compressed! [ 0x000e4060, 00100000, 0x00100000) <- fff8dbf0 dest 000e4060, end 00100000, bouncebuffer f73d000 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 0 run 309256 exit 0 Jumping to boot code at 000ff06e(0f7b6000) CPU0: stack: 00112000 - 00113000, lowest used address 00112c20, stack used: 992 bytes entry = 0x000ff06e lb_start = 0x00100000 lb_size = 0x0003b3c8 buffer = 0x0f73d000 SeaBIOS (version rel-1.9.1-0-gb3ef39f) BUILD: gcc: (coreboot toolchain v1.41 July 14th, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1 SeaBIOS (version rel-1.9.1-0-gb3ef39f) BUILD: gcc: (coreboot toolchain v1.41 July 14th, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1 Found coreboot cbmem console @ f7be000 Found mainboard PC Engines ALIX.2D Relocating init from 0x000e5480 to 0x0f768bc0 (size 45984) Found CBFS header at 0xfff80138 multiboot: eax=0, ebx=0 boot order: 1: /rom@genroms/ipxe 2: /pci@i0cf8/*@11/drive@0/disk@0 3: /pci@i0cf8/*@11/drive@1/disk@0 4: Found 8 PCI devices (max PCI bus is 00) Copying SMBIOS entry point from 0x0f7b4000 to 0x000f0800 CPU Mhz=498 Scan for VGA option rom EHCI init on dev 00:0f.5 (regs=0xfe017010) WARNING - Timeout at i8042_flush:71! OHCI init on dev 00:0f.4 (regs=0xfe016000) Found 0 lpt ports Found 2 serial ports ATA controller 1 at 1f0/3f4/0 (irq 14 dev 7a) ATA controller 2 at 170/374/0 (irq 15 dev 7a) ata0-0: SanDisk SDCFH-004G ATA-0 Hard-Disk (3815 MiBytes) Searching bootorder for: /pci@i0cf8/*@f,2/drive@0/disk@0 All threads complete. Scan for option roms Running option rom at c000:0003 pmm call arg1=1 pmm call arg1=0 pmm call arg1=1 pmm call arg1=0 Searching bootorder for: /rom@genroms/ipxe Press ESC for boot menu. Searching bootorder for: HALT drive 0x000f0790: PCHS=7751/16/63 translation=large LCHS=968/128/63 s=7813120 Space available for UMB: c1000-ef000, f0000-f0790 Returned 262144 bytes of ZoneHigh e820 map has 5 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 000000000f7b4000 = 1 RAM 4: 000000000f7b4000 - 000000000f7e0000 = 2 RESERVED enter handle_19: NULL Booting from ROM... Booting from c000:0382
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel