----- Original Message ----- | I wanted to pick someone's brain on this issue. I'm new to ipxe and had to | set up a ipxe server, I am running into an issue with getting the image on | to a physical machine. I initially thought it was a driver issue but I found | my nic card (Intel wg82567lm) in the list of supported cards. I drawing a | blank as to what to check in my configuration. The error I get on the | physical machine is 0x040ee119, I'm using server 2008 r2, dhcp service | running, wds, and iis. And like I mentioned if I start a vm virtual box and | set it to pxe it picks up the configurations with no problem? Is there | something I should be look at more closely.
some cards take a bit longer to initialize than others. Some switches, same thing. I just do a dhcp || retry and that often gets around the issue. -- James A. Peltier IT Services - Research Computing Group Simon Fraser University - Burnaby Campus Phone : 604-365-6432 Fax : 778-782-3045 E-Mail : jpelt...@sfu.ca Website : http://www.sfu.ca/itservices Twitter : @sfu_rcg Powering Engagement Through Technology _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel