Hi Michael, On 26.11.18 13:45, Michael Brown wrote: > On 26/11/2018 12:40, Oliver Rath wrote: >>> And O.P. is not aware that iPXE uses drivers from Linux. [1] >> >> Ok, this I didnt know. > > It's not actually true. It's possible to take a Linux driver as the > starting point for creating an iPXE driver, but it's not just a case > of copying and pasting.
Ok. This makes sense. > >> Imho ipxe should show the card (incl. BusID) in the config command. But >> this I can try: Implementing the BusID into the ipxe-Source. Mayby this >> helps. And normally every nic should work with undionly, shouldnt it? > > undionly.kpxe uses an UNDI driver provided by the NIC's own PXE > firmware. In your case, it sounds as though there is no existing PXE > firmware, so that won't work. Exactly. No PXE-Code here. > > What are the PCI vendor:device IDs for this NIC? Vendor:device ID is FC9d:4022 The card works under linux with this driver: https://github.com/acooks/tn40xx-driver Hth, Oliver _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
