William- There should ne no scarifice in performance as long as you keep the wire as straight as possible. I suggest you add as much lenghth as you possibly can. But, I do have a question about your steep hillside. Does your wire run up the hillside or down? Ideally, your wire should run DOWN the slope and not up. Also, what is your location? Good luck.
-- Marc DeLorenzo South Dennis, MA http://hometown.aol.com/midcapemarc/myhomepage/profile.html -------------- Original message ---------------------- From: "WILLIAM J. BROOKS" <[EMAIL PROTECTED]> > greetings, > my rx station is located on a steep, heavily-wooded hillside. > i am presently using a coaxial endfed, #12 ga., insulated > copper > longwire about 150ft.in length and about 20ft.above grade.it is oriented > in a sw-ne heading.i work the bcb exclusively for western u.s. stations. > i would like to increase the length and height but i am at the > limit of open space.in order to do this i would either have to cut much brush > and slay several trees (not preferred) or attach the insulated wire > tree-to-tree > (preferred) which would then permit a dramatic increase in height and length. > question:> would there be a sacrifice in performance if i chose the > tree-to-tree route _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com
