I would be wary of putting any QSLs which were totally or partially printed using toner in a plastic sheet protector. This includes letters. If you leave them inserted forever, OK, but after a few years, the toner substance bonds with the plastic, and when you remove them, much of it is absorbed into the plastic - and it is impossible to get it off.
Another preservation method would be to scan them. Not sure I will ever get around to that... Pete Taylor Tacoma, WA 12225w 4719n HQ180 & ICF2010 Kiwa aircore & Palomar loops DX398, SRF-59 & M37V Eton E100 + Tecsun PL-300/380 ========================== Patrick Martin wrote: > You can always use the 3-ring binder and use plastic sheet protectors. _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com