Craig, is there any info online about how to make bulans for CAT to use on BCB? Thx .. KAZ
-----Original Message----- >From: Craig Healy <bu...@dukes-of-hazzard.com> >Sent: Jul 28, 2011 8:46 AM >To: Mailing list for the International Radio Club of America ><irca@hard-core-dx.com> >Subject: Re: [IRCA] RG11 > >> Does anyone use RG11? I have never used it and is it harder to put >> connectors on over RG6? Thanks. > >Depends on the type. If it's the copper based version, regular UHF plugs >can be soldered on just as is done with the more common RG-8. The aluminum >based type would use a specific crimp connector which would require the >right tools. > >One problem with RG-6 for MW frequency is the loss. The center conductor is >copper coated steel. This has a higher resistive loss as the frequency >drops. RG-6 used for video is solid copper center conductor. This is for >composite video, not VHF or UHF. > >Rather than use RG-11 I'd probably buy RG-8 that is suitable for being >buried. Even RG-58 would be OK if it's under 100 feet or so. It can be >bought with connectors already installed. Plug and play. > >Another test I made is making a balun for each end and using CAT5 ethernet >network cable. It's balanced and gathers less noise or unwanted signals on >the way in. Also cheap and very easy to build. > >Craig Healy >Providence, RI > >_______________________________________________ >IRCA mailing list >IRCA@hard-core-dx.com >http://montreal.kotalampi.com/mailman/listinfo/irca > >Opinions expressed in messages on this mailing list are those of the original >contributors and do not necessarily reflect the opinion of the IRCA, its >editors, publishing staff, or officers > >For more information: http://www.ircaonline.org > >To Post a message: irca@hard-core-dx.com > _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com
