Good article Gary, thanks. Definitely on my list of things to experiment with :D
Tim Hills Sioux Falls, SD On 10/15/2011 11:17, d1028g...@aol.com wrote:
Hello All, As most of you know, there has been quite a lot of interest in the new Ferrite Sleeve Loop antennas among many in the AM-DXing community, but there are very few resources to help DXers actually try out the antenna, or even know how to get started in building one. In an effort to change this situation a detailed 7" FSL construction article was written, with a deliberate attempt to include "Heathkit-like" user-friendly instructions and many Photoshop-enhanced assembly pictures. For those who are curious about the new antenna's construction, operation and DXing capabilities, this new 10-page article will answer all your questions. Designed to be built with a component cost of around $150, this 7" FSL takes up only about one cubic foot of space-- but has been tested extensively against a full-sized 4' PVC box loop here, with superior weak-signal reception results. All four 7" FSL test models here have demonstrated this weak-signal superiority over the 4' air core loop (the antenna which provided reception of 30 DU stations on Ultralight radios during the August 2010 DXpedition to Lincoln City, OR). Unlike similar -sized compact antennas this 7" FSL will provide a very serious gain boost to any portable radio with a loopstick-- even full-sized models like the Sony ICF-S5W and the Panasonic RF-2200 (without the need for any radio modification). With extensive advice on tracking down construction parts and obtaining the best DXing results from your compact FSL, this article will hopefully motivate both experienced builders and beginners to accept the challenge of construction, and personally experience the astonishing performance of this new antenna design. http://www.mediafire.com/?dshnqlbydf6qu25 73 and Good DX, Gary DeBock (in Puyallup, WA, USA)
_______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com