I can tell you that we ran it on KSMU... and since our main Springfield 
transmitter (91.1FM) AND our translators in Branson/Point Lookout (90.5) and 
West Plains (90.3) ALL run IBOC/HD Radio with the resultant several-second 
delays, it definitely was not "synchronized!"  (The Branson translator picks up 
our audio off-air, and then adds its own IBOC delay to that!)  And yes, the 
audio was total and utter crap, with distortion, crosstalk, funky 
start-of-message/end-of-message tones, etc.   Glenn's estimation of 1:00:30pm 
CST is pretty much accurate, judging from when the start-of-message tones 
interrupted the automated TOH break that we had playing. 
     Journal Broadcast Group here in Springfield 
(KTTS-FM/KSPW-FM/KRVI-FM/KSGF-AM [1260] & FM) received their audio for the 
national test from us, and noted the bad audio as well.  In fact, the station 
that relays THEIR EAS tests, KJEL in Lebanon, MO, had to get back on the air 
manually because the end-of-message tone didn't trip their equipment to switch 
back to their regular audio!  Oh well, that's precisely why they test these 
things--to figure out what bugs exist and how to work them out of the system.

Randy Stewart
Arts Producer
KSMU
901 S. National
Springfield MO 65897



-----Original Message-----
From: am-boun...@nrcdxas.org [mailto:am-boun...@nrcdxas.org] On Behalf Of Glenn 
Hauser
Sent: Wednesday, November 09, 2011 1:54 PM
To: d...@yahoogroups.com; ABDX; amfmt...@mailman.qth.net; a...@wtfda.info; 
irca@hard-core-dx.com; a...@nrcdxas.org; m...@yahoogroups.com
Subject: Re: [NRC-AM] DXing the nationwide EAS test, imminent

Here`s what I observed, anyway. Don`t have an analog dial AM radio handy for 
rapid tuning, so decide to use the caradio in the garage; unfortunately, that`s 
where there is also a lot of line noise, especially on low end of AM so I 
concentrate on the high end:

1900 UT: nothing happens
1900:30 approx., the test starts on many frequencies Quick scan downward finds 
these are still in regular programming, news or whatever:
1580 KOKB Blackwell OK
1490 KMFS Guthrie OK
1230 WBBZ Ponca City

A minute or so later, WBBZ newscast was referring to the EAS test having just 
happened. So maybe it was included there and I missed it.

1340 KGHM Midwest City OK, I think was the one where I caught the end of the 
test, with extremely distorted unreadable speech, then chopped off. I guess 
that was the way whatever station they picked up to relay was sounding?

1130 KLEY Wellington KS in dead air at 1902-1904+. Don`t know if they did the 
test, but not unusual for them to SNAFU like this.

With only one radio running, and very limited time, I can`t be positive, but 
besides the above anomalies, it was my impression that the test was NOT 
synchronized across the dial. Of course many stations have different satellite 
delays, etc., or even built-in 7-second delays on everything. But to be 
effective should it not be synchronized?

Was this entirely optional, or will stations which really ignored it or messed 
it up be subject to fines? I look forward to reports from the rest of you.

73, Glenn Hauser, Enid OK

--- On Wed, 11/9/11, Glenn Hauser <wghau...@yahoo.com> wrote:

> Date: Wednesday, November 9, 2011, 12:04 PM At 1900 UT this Wednesday, 
> as extensively publicized. (noon MST)
> 
> Only 30 seconds? Be quick about it, but tune across the AM or FM bands 
> and find any stations which are NOT running the test. Or employ your 
> Perseus to catch everything for later analysis.
> 
> 73, Glenn Hauser
 
_______________________________________________
The NRC AM mailing list
Now accepting pre-orders for the 32nd AM Radio Log Questions? ow...@nrcdxas.org 
Latest DX Tests are found at http://www.nrcdxas.org

_______________________________________________
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Reply via email to