Thanks, Guy! As I said earlier, the guys who own the FlexRadio units are both
hams first and foremost. Both of theirs are more current units, the Flex-1500
and Flex-5000. Don't know what their situations are with sound cards.
Randy Stewart
Arts Producer
KSMU
901 S. National
Springfield MO 65897
(ORIGINAL MESSAGE)
Date: Fri, 6 Jan 2012 08:27:35 -0800
From: Guy Atkins <d...@guyatkins.com>
As Nick mentioned I did indeed run a blog for a couple of years that focused on
the FlexRadio SDR as a MW and tropical bands DXing receiver.
The FlexRadio product at the time was the SDR-1000.
As a first generation SDR it was a groundbreaking transceiver, but fell
short in many areas for "our" kind of usage. The software itself (PowerSDR) was
very amateur radio oriented and the transceiver had strange quirks such as
large carriers and images that would appear outside of the ham bands (in
mediumwave and long wave frequencies for instance. I ended up repackaging the
unit with custom high and low pass filters to eliminate the problem and added
other goodies like a Griffin Powermate tuning knob, and the Atlas & Janus I/Q
boards from the HPSDR project, headed up at the time by Quicksilver SDR
designer Phil Covington. Photos of the highly modified FlexRadio SDR-1000 can
be seen here:
https://picasaweb.google.com/114798392023680237679/SDR1000HPSDRBoardsCustomEnclosure
FlexRadio transceivers have moved far beyond the early SDR-1000, but I'm
unfamiliar with their current products since I moved on to the Perseus SDR in
2007 (and transitioned my FlexRadio blog to one for Perseus for three years
after that). The SDR-1000's architecture required a separate PC sound card to
operate, unlike the Perseus approach. The sound card was the key to its
performance; high quality external sound cards from firms like Edirol or
M-Audio were needed to get the lowest noise floor and the best dynamic range
with the FlexRadio. Perhaps current FlexRadio transceivers no longer require a
separate sound card.
Keep in mind that if you go with FlexRadio that the vast majority of users
are hams, and you won't get a lot of support and feedback if you have issues
with the rig when using it as a MW or broadcast bands receiver. That was
another reason I moved to the more MW/SWL friendly Perseus SDR... the user
community is more broad based than just ham radio operators.
73,
Guy Atkins
Puyallup, WA
_______________________________________________
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original
contributors and do not necessarily reflect the opinion of the IRCA, its
editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@hard-core-dx.com
