On Jul 12, 2013, at 9:16 PM, irca-requ...@hard-core-dx.com wrote: > Thanks for the comments, Nick. Yes, Apple makes available a free program > called Bootcamp which allows you to run Windows on a Mac. But if a Windows > tablet works, they're around cheap enough and that might be a way to go. > Also, DL2SDR has authored a Mac program that supports SDR radios but I don't > know how compatible it is with the Excalibur. Thanks for the suggestion, I'll > check out the Perseus and Excalibur groups and see what I can find out. > Regards. > > Anthony R Gargano > n...@n2ss.com > ------------------------------ > > Message: 2 > Date: Fri, 12 Jul 2013 14:29:41 +0000 > From: Nick Hall-Patch <n...@ieee.org> > To: Mailing list for the International Radio Club of America > <irca@hard-core-dx.com> > Subject: Re: [IRCA] SDR Recommendations? > Message-ID: <201307121437.r6cebrdf001...@tx.kotalampi.com> > Content-Type: text/plain; charset="us-ascii"; format=flowed > > I'm afraid I don't have a lot of experience with your possible > choices for SDR, Anthony, and none with driving them with an Apple > computer, but a couple of thoughts: > > I lurk on the Perseus Yahoo list, and people do you use Apple > computers for Perseus, but I believe it's by running some sort of > Windows virtual machine. You could probably get some answers on > that group, perhaps by first searching the archives. > > I seem to recall problems recording the entire band with the > Excalibur, at least using the native software, but I'm happy to be > proved wrong. There are a couple of Yahoo groups devoted to > Winradio, so again you might get better information there. > > I've run the RFSpace SDR-14 with little effort using a Windows 8 > tablet (from Samsung, not Microsoft), and found the tablet itself to > be remarkably competent for such a low power device, so it may well > have been able to handle a Perseus with its wider bandwidth. But it > has to be Windows 8, not Windows RT! > > best wishes, > > Nick > > > > At 13:10 12-07-13, you wrote: >> I've been considering adding an SDR to my MW dx tool arsenal but I >> am a newbie in that area and am looking for any thoughts or >> recommendations from those of you more experienced than me. The >> primary appeal to me about SDR is the ability to record the entire >> band for later searching. >> >> Currently, I am all Apple: Imac, Macbook Pro, iPad. I've been >> reading up on and have been pretty impressed with the Perseus and >> the WinRadio Excalibur. Are there any Mac users out there using >> them? If so, what do I need to be aware with regard to interface and >> software requirements? If Mac is out of the question for either of >> those, would they work with one of the new Microsoft tablet PC's or >> would I need a full blown Windows PC system? >> >> Another thought I had was to initially, perhaps just 'get my feet >> wet' and play around with one of the USB dongles I've seen >> advertised. Are they a waste of time for serious use? If not, will >> any of those work with a Mac? >> >> Any comments or suggestions would be greatly appreciated. >> Thanks >> >> Anthony R Gargano >> n...@n2ss.com >>
_______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com