Hello All, A second FSL-powered Tecsun PL-380 model has been developed with sensitivity and selectivity comparable to the original 3" Bar FSL model introduced in December-- but with a greatly superior nulling capability added as well. This model has been specifically designed to cut pest stations down to size-- and does so with breakthrough effectiveness. Using the commonly available 62mm Russian surplus ferrite bars, the model features both an isolated FSL coil and a shielded ground for the Litz wires. Breakthrough FSL sensitivity is augmented by the PL-380's Si4734 DSP chip, providing the triple advantage of superior weak signal performance, razor-sharp selectivity and exceptional nulling function. As with the original hard-wired FSL PL-380 model, the radio's internal Si4734 DSP chip tunes the FSL antenna for maximum sensitivity, so there is no need for the DXer to peak a variable capacitor. Each frequency tuned in on the PL-380 is already peaked for maximum sensitivity from 521-1701 kHz. A photo of this new model is posted at https://app.box.com/s/5r95oxc9v24vm9hbpe2w1g800lbt4d3b The full 15-page "Heathkit-like" construction article has been uploaded to http://www.mediafire.com/view/je2v6xorlnjmmbo/4.25inchFSLPL-380.doc Good luck to all who take up the challenge! 73 and Good DX, Gary DeBock (in Puyallup, WA, USA) _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com