I just bought a pair of these to reduce some radiation from one antenna (using an SDR--Radiating Computer generated RF) into another antenna using a conventional receiver. I put one on each antenna, in the "shack".

These common mode chokes have worked wonders, not only did they completely eliminate the PC/SDR noise, but they also reduce other induced noise from the house and neighbors.

At least in my case---I am very satisfied!



Robert LaFore

Acworth GA

On 4/27/2016 11:25 AM, Les Rayburn wrote:
In response to several requests from both MW DX’ers and 160 Meter enthusiasts, 
MyAntenna.com has added a new receive-only common-mode choke to their line of 
impressive products. This common mode choke can be inserted anywhere in the 
feed line to your BOG, active whip, loop, etc. The choke blocks unwanted noise 
that is often picked up by the coax as it travels from the antenna back to your 
shack.

Many manufacturers claim that their chokes will work over impossible bandwidth 
of frequencies, which simply isn’t possible. In contrast, these chokes are 
designed to work over a limited range of frequencies. In this case it’s 500 KHz 
to 10 MHz.

Common-mode attenuation: ~37dB
Choking Impedance >5,000 Ohms

The choke will allow DC power to pass through to active antennas, and can be 
inserted anywhere in the feed line, including inside the shack. For best 
results, it’s recommended that the choke be installed about 20 feet from the 
antenna. I have no financial relationship with the company, but am a satisfied 
customer.



http://myantennas.com/wp/product/cmc-0510-r/

If you have EMI/RFI problems or just want to reduce the noise floor to your 
receiver, you can’t go wrong by installing good quality common-mode chokes in 
your system.


73,

Les Rayburn, N1LF
121 Mayfair Park
Maylene, AL
EM63nf

Member WTFDA, IRCA, NRC. Former CPC Chairman for NRC & IRCA.

Elad FDM-S2 SDR, AirSpy SDR, Quantum Phaser, Wellbrook ALA1530 Loop, Wellbrook 
Flag, Clifton Labs Active Whip.


_______________________________________________
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Be sure to register now for the Joint DX Convention
Kansas City, September 9 to 11.  Hotel space is filling up.
Registration info:
http://www.nrcdxas.org


Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com


_______________________________________________
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Be sure to register now for the Joint DX Convention
Kansas City, September 9 to 11.  Hotel space is filling up.
Registration info:
http://www.nrcdxas.org


Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Reply via email to