TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Sent out with wrong subject line ... sorry, got in a hurry.

-----Original Message-----
From: Halsted, Richard Mr. (Automation, 2d Sig Bde) 
Sent: Friday, November 30, 2001 9:12 AM
To: '[EMAIL PROTECTED]'
Subject: RE: Server Sensor and WLBS


To All,

Don't know if this is appropriate for this forum or no but I need to start
somewhere so please forgive the stupidity.  

We're running mixed mode (Win98, NT4.0 server and workstation, W2K Pro WS,
W2K (member only) Server) so this is probably more complicated than it needs
to be.

I would like to run a logon script file for my users that:

1. Checks OS; 

   a.  IF %WinOS%=NT5 GOTO w2kpatch.bat (etc, etc.)
   b.  IF %WinOS%=95 or 98 GOTO OSnotify.bat (log file with %COMPUTERNAME%)
   c.  IF %WinOS%=95 or 98 GOTO w9xpatch.bat (etc, etc.)

2. For W2K OS machines w2kpatch.bat starts out with "Run As Administrator"
and password

3. For all systems, once the patch(es) are installed, log file is generated
and sent to a pre-designated server/folder with %COMPUTERNAME%, date, and
what was installed info.

This request is being asked due to the number of patches being generated and
the scarcity of people (SAs) to actually install (and verify) the required
installations.  

I am also in need of finding out how to roll several patches into one script
in order to save time and negate the need of a reboot each time a patch is
installed.  To top everything off, all the installs need to show up in the
Control Panel's 'Add/Remove Programs'.

I am just now learning scripting so helping hints would be appreciated.  In
the past it has always sit down at the terminal and just do it there;
however, nowadays I am running out of time and new patches keep coming in.

Guidance, advice, where-to-go for help would be greatly appreciated.  Thanks
for your patience.

rich
R.M. Halsted
Systems Administrator
2d Signal Brigade
Unit # 29919, Box 52
APO AE 09086-3010

DSN Phone:  (314) 381-8812 
Commercial Phone:  (49) 621-730-8812
DSN FAX:  (314) 381-8532
Commercial FAX:  (49) 621-730-8532
E-Mail:  <mailto:[EMAIL PROTECTED]>

**********************************************************************
Privileged/Confidential Information and/or Copyright Material may be
contained in this e-mail. The information and Material is intended for the
use of the intended addressee. If you are not the intended addressee, or the
person responsible for delivering it to the intended addressee, you may not
copy or deliver it to anyone else or use it in any unauthorized manner. To
do so is prohibited and may be unlawful. If you receive this e-mail by
mistake, advise the sender immediately by using the reply facility in your
e-mail software.








-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 29, 2001 8:32 PM
To: Damian Carter
Cc: '[EMAIL PROTECTED]'; [EMAIL PROTECTED]
Subject: Re: Server Sensor and WLBS



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

It won't work.  In a nut shell it puts a wedge in the IP stack that cannot
happen in a virtual environment.
Hope that helps.
Paul L.


 

                    Damian Carter

                    <DCarter@fami        To:     "'[EMAIL PROTECTED]'"
<[EMAIL PROTECTED]>                      
                    ly.co.uk>            cc:

                    Sent by:             Subject:     Server Sensor and WLBS

                    owner-issforu

                    [EMAIL PROTECTED]

 

 

                    11/29/01

                    06:00 AM

 

 






TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------


Hi,

Does anyone know a successful way to apply a Server Sensor to a NIC that is
using Microsoft WLBS (Windows Load Balancing System). The WLBS creates a
virtual NIC and TCP/IP for the physical NIC is disabled in the bindings as
it uses the TCP/IP on the Virtual NIC.
We are using Real Secure 5.5 on Windows NT.
I have a fear that this is not possible but any ideas or advice at all will
be appreciated.


Cheers

Damian




Why not visit our website at http://www.family.co.uk

This message is sent in confidence to the addressee only. The contents
should not be disclosed to anyone other than the addressee. If you receive
this message in error please advise the sender. Any opinions expressed are
those of the author only and not necessarily the Society or Company. This
e-mail does not constitute either offer or acceptance of any contractually
binding agreement.

Family Assurance Friendly Society Limited (incorporated under the Friendly
Societies Act 1992 Reg.No.939F) and Family PEP Managers
Limited(Co.No.2934967) are regulated by the Personal Investment Authority
for investment business. Family Equity Plan Limited (Co.No.2208249) and
Family Investment Management Limited (Co.No.1915516) are regulated by the
Personal Investment Authority and IMRO for investment business. Family
Enterprise Limited (Co.No.2489291) provides products which are not
regulated by the Personal Investment Authority or IMRO. Registered in
England at 16-17 West Street,Brighton BN1 2RL.






This e-mail and any attachments are intended only for the individual or
company to which it is addressed and may contain information which is
privileged, confidential and prohibited from disclosure or unauthorized use
under applicable law.  If you are not the intended recipient of this
e-mail, you are hereby notified that any use, dissemination, or copying of
this e-mail or the information contained in this e-mail is strictly
prohibited by the sender.  If you have received this transmission in error,
please return the material received to the sender and delete all copies
from your system.




Reply via email to