TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Yes Kim,
we are running a script very close to that.  A process that I don't think we
should have to do, the application should do this on its own.

While we are speaking of this problem, is IIS aware also that when this does
happen (ie Event collector disconnected from the Ent.DB which then
disconnects the sensors from the event collector), that the Console will
contine to show Connected / Active / Connect in the Managed Assets window?
Even though the event collector is NOT connected to the Ent.DB.   Of course
it will sit there til the cows come home, in that configuration.  You must
STOP the event collector, then restart the event collector before it will
attempt to connect to the Ent. DB. This seems to me as a bug.  Sure the
Network sensors will continue to try to reconnect to the event collector on
a regular basis, but the Event collector never seems to again try the
connection to the Enterprise DB, unless its STOP, then STARTED.


Also, I seem to remember a bug whereas if you had the Enterprise DB (MSSQL)
on the same system as the Event Collector and the Console, you would seem
something about the same, because it would seem the Event collector would
start up before it could attempt to connect to the Ent.DB. or something like
that, its been a while since I heard about that one and it did not directly
affect our clients.

Are these bugs being looked into?

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Apers, Kim (ISS Brussels)
Sent: Wednesday, January 23, 2002 12:41 AM
To: 'Kendall Risselada'; '[EMAIL PROTECTED]'
Subject: RE: Sensor's going offline



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

If you backup the Enterprise database, you stop all eventchannels and
sensors will log locally until the local logfile is full. Depending on the
settings you set the sensor will stop logging when local logfile is full or
continue and wrap around.

You need to stop/start the eventcollector to re-establish eventchannels and
push data back into the database and empty the locallogfiles. This can be
done by asked your backupprogram to execute a batchcommand after backup is
done.

In this batchcommand use the CLI to stop/restart the eventcollector.

:::
EngineMgr -a addasset -e 10.10.10.10 -n event_collector_1 -t eventcollector
EngineMgr -a revokemaster -e 10.10.10.10 -n event_collector_1 -t
eventcollector
EngineMgr -a acqmaster -e 10.10.10.10 -n event_collector_1 -t eventcollector
EngineMgr -a stop -e 10.10.10.10 -n event_collector_1 -t eventcollector
EngineMgr -a start -e 10.10.10.10 -n event_collector_1 -t eventcollector
EngineMgr -a relmaster -e 10.10.10.10 -n event_collector_1 -t eventcollector
:::

See also appendix in WGM User Guide about all options.



-----Original Message-----
From: Kendall Risselada [mailto:[EMAIL PROTECTED]]
Sent: dinsdag 22 januari 2002 21:10
To: Rakesh Thakur; Bob Fillmore
Cc: [EMAIL PROTECTED]
Subject: RE: Sensor's going offline



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

Also seen this behavior when backing up the enterprise db (MS Sql)

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rakesh Thakur
Sent: Tuesday, January 22, 2002 6:01 AM
To: Bob Fillmore
Cc: [EMAIL PROTECTED]
Subject: Re: Sensor's going offline



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

Even I am facing the similar problem but in my case, its a server sensor on
a Solaris box. I am tired of doing stop and start of the realsecure daemon.
Is this a bug and any solution for this available yet ?

Thanx & Regards,

Rakesh
----- Original Message -----
From: "Bob Fillmore" <[EMAIL PROTECTED]>
To: "Patrick J Morrissey" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, January 22, 2002 3:29 AM
Subject: Re: Sensor's going offline



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

We have found in the past that if the NIC card is temporarily
disconnected, or the hub/switch that it's connected to has a
power bump, then the network sensor sometimes needs restarting.
I think the network sensor code needs to monitor the NIC link status
and reinitialize itself if the link goes down/up.
(at least as an optional configuratiuon setting)
Maybe your network is having problems?

  - Bob Fillmore

Patrick J Morrissey writes:
>
>
> TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
to
> [EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
> --------------------------------------------------------------------------
--
>
> The last post reminded me of an ongoing problem I've been wanting to ask
> about (though I have no answer to that particular post, sorry).  We have
> several sensors that seem to go offline on an irregular interval but you
can
> guarantee they'll need to be restarted at least twice per day.  Has anyone
> shared this problem and resolved it.  Is it a function of too many rules
in
> the policy?  Inadequate hardware?  Bug?  I'm at a loss.  The sensors are
> uptodate with rev.
>
> Thanks
> Pat
>
> Patrick J Morrissey
> Sr. IT Security Specialist
> Rockwell Collins
> ph: 319 295 9436
> email:  [EMAIL PROTECTED]
>
>
>
>


--
Bob Fillmore, Technical Services Division          email:
[EMAIL PROTECTED]
  Information Management Branch,
  Natural Resources Canada,                        Voice: (613) 992-2832
  580 Booth St., Ottawa, Ontario, Canada  K1A 0E4  FAX:   (613) 996-2953













Reply via email to