TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Hello again,

First of all, thank you all very much for the replies to my question. I
appologise for the second posting on the same question but...

I understand how the out-of-band comms works with network sensors since it
is the RealSecure software that listens on the NIC without TCP/IP,
Netbios..etc. The console and sensor communicate using the two NIC's with
TCP/IP.

Can anyone point me to a document or explain how this could be achieved with
a server sensor and NT? ie the console speaking to the unbound NIC (stealth
mode) of a DMZ server?

Any help on this is much appreciated.

Jeremy



-----Original Message-----
From: Fitch, Brian (ISS Atlanta) [mailto:[EMAIL PROTECTED]]
Sent: 23 January 2002 04:54
To: 'Holmes Jeremy'; '[EMAIL PROTECTED]'
Subject: RE: Server Sensor in the DMZ / Open Ports



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

TCP traffic is bidirectional.  The firewall would need to be configured
accordingly.  

The sensor listens/waits for connections, it does not initiate communication
with the event collector or console.  However, the sensor WOULD initiate a
connect if it is say...sending an email response.

Brian Fitch
Systems Engineer
Internet Security Systems, Inc.




-


==========================================================================
This message and any attachments are confidential and may also be
privileged.
Its contents do not constitute a commitment by the Channel Tunnel Group Ltda
 nd/or France-Manche S.A. except where provided for in a written agreement
between you and The Channel Tunnel Group Ltd and/or France-Manche S.A.
Any unauthorised disclosure, use or dissemination, either whole or partial
is prohibited. If you are not the intended recipient of the message, please
notify the sender immediately. The views expressed in this message do not
necessarily reflect those of The Channel Tunnel Group Ltd and/or
France-Manche
S.A. or any of their subsidiary companies.

Ce message et ses annexes sont confidentiels et peuvent contenir des
informations prot�g�es par le secret professionnel. Son contenu ne
repr�sente
en aucun cas un engagement de la part de The Channel Tunnel Group Ltd
et/ou France-Manche S.A. sous r�serve d'un accord conclu par �crit entre
vous et
The Channel Tunnel Group Ltd et/ou France-Manche S.A. Toute publication,
utilisation ou diffusion, m�me partielle, est interdite. Si vous n'�tes pas
destinataire de ce message, merci d'en avertir imm�diatement l'exp�diteur.
Les opinions exprim�es dans ce message ne refl�tent pas n�cessairement
celles de The Channel Tunnel Group Ltd et/ou France-Manche S.A.
ou de leurs soci�t�s filiales


Reply via email to