TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Could you you check that your
"Open last file on startup" checkbox is checked....in the RealSecure Console 
configurartion...

Best of Luck....

Regards,
MOhi


>From: "FUD Pucker" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: RE: Network Sensor problem
>Date: Thu, 24 Jan 2002 13:39:31 -0700
>
>
>TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
>[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any 
>problems!
>----------------------------------------------------------------------------
>
>It seems to work more consistently when you do it from the Deployment
>Wizard.
>
>However, on several occasions I've seen the same error as Mechfox, on
>sensors which I have already added to my Event Collector!  It appears you
>have to re-add sensors periodically; it's as if the Event Collector doesn't
>recognize the sensor, even though if you check its properties, the sensor
>exists in the list (of course because I've already added it and re-added it
>at least 5 times).
>
>It only happens when I shutdown the Workgroup Manager, reboot the box and
>bring it back up.  I've tried both ways, Deployment Wizard and adding the
>sensors manually from the Event Collector Properties window, no difference.
>I can almost guarantee I'll see the same error next time I have to restart
>my Workgroup Manager.
>
>Anyone else seeing this and/or have any solutions?
>
>Thanks!
>P_FUD
>
>
>
>
>-----Original Message-----
>From: Fitch, Brian (ISS Atlanta) [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, January 24, 2002 9:19 AM
>To: 'mechfox mechfox'; [EMAIL PROTECTED]
>Subject: RE: Network Sensor problem
>
>
>
>TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
>[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
>problems!
>----------------------------------------------------------------------------
>
>You need to configure your Event Collector to pull the datastream from the
>network sensor.
>
>This is accomplished  by going into the properties of the Event Collector
>and adding the sensor(s).
>
>Reference the Workgroup Manager section on "Configuring Event Sources" for
>more assistance.
>
>-Brian
>
>-----Original Message-----
>From: mechfox mechfox [mailto:[EMAIL PROTECTED]]
>Sent: Wednesday, January 23, 2002 8:35 PM
>To: [EMAIL PROTECTED]
>Subject: Network Sensor problem
>
>
>
>TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
>[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
>problems!
>----------------------------------------------------------------------------
>
>I'm quite new with RealSecure. I'm currently
>installing Network Sensor 6 but it seems the WGM can't
>monitor the sensor because it keep on displaying this
>message  "The Sensor is not being monitored by an
>EventCollector so the Event Channel can not be opened.
>Configure an EventCollector to monitor the sensor and
>verify that the EventCollector properly monitors the
>sensor.  [ID=0xc72c0066]" I've already included it in
>my WGM as one of the sensors to be monitored but to no
>avail. Any idea what to do?
>
>Mechfox
>
>__________________________________________________
>Do You Yahoo!?
>Great stuff seeing new owners in Yahoo! Auctions!
>http://auctions.yahoo.com
>
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
>
>
>




_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com



Reply via email to