TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

The console will receive the NAT address from the sensor (because he is
receiving an eventchannel from the NAT address).
So enable portforwarding of 903 to your internal EC and it will work just
fine. The console will look for port 903 on the NAT address.

Or you can upgrade to RS 6.5 EC and console and set an override address,
this is the IP address the sensor will report to any console asking for it.
Here you set the private IP of the real EC.



-----Original Message-----
From: "Knei�l, Thomas" [mailto:[EMAIL PROTECTED]]
Sent: dinsdag 29 januari 2002 11:27
To: '[EMAIL PROTECTED]'
Subject: RS and NAT on AIX



TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------

Hello,

a firewall, which is utilizing NAT, is between the Console and the Sensor,
after consulting the knowledge base we got the following information:

When monitoring a sensor through a firewall utilizing NAT, the Console is
unable to connect to the event channel for the sensor. This results from the
sensor passing the wrong Event Collector IP address to the Console. You will
receive an error stating that the connection attempt has timed out.

Now the question, are there some other solutions (the OS-Sensor is running
on AIX 4.3.3) at all instead of the suggested workaround (running a script,
avaible only for Solaris and Windows, which is continuously changing the
real IP address to the NAT address).

Any type of help would be highly valued.

Thanks in advance,
______________________________________________________
Thomas Knei�l                      




Reply via email to