Hi Toma,


RS 7.0 XPUs are usually fairly easy to apply. And dont break service. I have had one 
go wrong enmass, but I should have tested it more extensively first. I have had no 
real problems on HPUX or W2K so far with XPUs. 

So: Test Test Test. Thats whats you must do! If the system is mission critical, I am 
sure your organisation can afford to have a test system as well.

Realsecure 7.0, so far, hasnt had any Service Releases.  The 6.5 SR's are more 
disruptive as they restart.

Avoid ISS's "FRUs" like the plague, they have horrendous consequences to the agent 
itself, and they go wrong over 60% of the time. But they have never brought a server 
down (unless its the poor IDS guy who has to manually remove the failed update and 
reboot the machine)

Stephen

>>> "BELITCHKI, Toma (HO)" <[EMAIL PROTECTED]> Friday 12, September, 2003 17:17:00 >>>
Hi Guys,
I would like to ask for your experience in regards to the Server Sensors
update process.
Do you consider it more like an anti-virus update - wherever you have new
attack definitions, you apply them automatically, or you first test the
update on test machines, perform degradation testing, etc. and only if the
tests are conclusive - update the production machines.
We run our sensors on a mission critical machines and it's unacceptable to
brake the server's functionality because of the Server Sensor's update. That
implies thorough testing of the updates before going in production, from
other side, this is resource and time intensive job which delays the Sensor
update process.

I would like to hear about your experience, have you ever had a problem,
where applying the XPUs would break the server?
I personally used to look to the Server Sensors as non-intrusive components
of the system, until we had the problem with the rsiisfilter.dll ISAPI
filter, who was causing the inetinfo process of our web server to go 100%
CPU (it was fixed with SS 6.5 SR 3.4).

Regards,

Toma
_______________________________________________
ISSForum mailing list
[EMAIL PROTECTED] 

TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to 
https://atla-mm1.iss.net/mailman/listinfo



Disclaimer

This e-mail message shall not be construed as legally binding on the Bank for 
International Settlements (BIS). As internet communications are not secure, the BIS 
does not accept responsibility for the content of this message.

This message is intended only for the recipient(s) named above. Any unauthorized 
disclosure, use or dissemination, either in whole or in part, of this message is 
prohibited. If you have received this message in error, please inform the sender 
immediately by return e-mail and delete this message and any attachments thereto from 
your system. 
Thank you for your co-operation.


_______________________________________________
ISSForum mailing list
[EMAIL PROTECTED]

TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to 
https://atla-mm1.iss.net/mailman/listinfo

Reply via email to