AW: [ISSForum] Manual Upgrader says it cannot find the license fi le

[Mohr James]

Title: Nachricht

Hi All!   Actually it turns out the file has to have an ending .key. It was .txt, which apparently does not work. When is simply changed the ending to .key, it worked fine.  Thanks to everyone for their help! Regards,   Jim Mohr -----Urspr�ngliche Nachricht----- Von: Eduardo Palacio Osorio [mailto:[EMAIL PROTECTED] Gesendet: Montag, 24. November 2003 21:33 An: Mohr James; [EMAIL PROTECTED] Betreff: Re: [ISSForum] Manual Upgrader says it cannot find the license fi le Jim: Definetly your license must be corrupted some how. Look for the original key file generated by the WOS with the format: iss_xxxxxxxx_key.key Where the first 6 x correspond to your OCN and the last 2 to a sequential number. The MU will take any valid license for IS(Internet Scanner) or RS(Real Secure). Regards epo   ----- Original Message ----- From: Mohr James To: Ballerini, Jean Paul (ISS EMEA) ; Schmehl, Paul L ; [EMAIL PROTECTED] Sent: Monday, November 24, 2003 10:26 AM Subject: AW: [ISSForum] Manual Upgrader says it cannot find the license fi le At this point, running it once or twice is pretty moot. I have not even been able to run it once. It simply will not take the license key. When I start the manual upgrader, it asks for a license key, so I selec the one containing the sensors (as someone suggested). Each time, I get the message "The license file was not found." The license file is in the same directory and the manual upgrade and I am given a dailog box where I input the location, so why cannot it find the file????   Regards,   Jim Mohr -----Urspr�ngliche Nachricht----- Von: Ballerini, Jean Paul (ISS EMEA) [mailto:[EMAIL PROTECTED] Gesendet: Montag, 24. November 2003 10:49 An: Schmehl, Paul L; Mohr James; [EMAIL PROTECTED] Betreff: RE: [ISSForum] Manual Upgrader says it cannot find the license fi le See below. Jean Paul Again, I'm new at this, so I could be wrong, but here's how I did it. 1) I ran MU on my laptop to download all the updates. 2) I copied the entire directory structure of MU over to the SP server 3) I copied the 5 xml files (in the MU directory) to the %appserver%\XPU directory 4) I ran MU on the server, declined to download the catalogs (because I can't) and then chose File\Copy Files to RSSP and "pointed to" the xml files in the XPU directory At that point, MU created an update directory under %appserver%\XPU and copied all the files from the MU directory to the %appserver%\XPU\update directory.  There are subdirectories under update for Internet Scanner, Site Protector, etc. So, you *do* have to run MU on the server, in order to get the files copied to the correct location, but you also have to run it on a box that has Internet access in order to download the udpates. [Ballerini, Jean Paul (ISS EMEA)] You don't have to run the MU twice. Once it has run on your machine connected to the Internet, you just have to copy the xml files and the update directory (with subdirectories). Afterwards, you have to get SPCore to re-read the xml files (the simplest way is to open the properties, check and uncheck a box, and apply. This will apply the properties and do the trick). At that moment you'll have the updates available on the AppServer, ready to be applied.   BTW, you can delete the update directory on the server any time you want and just run MU again to recreate it. The updates won't work unless your license is "registered" with both SP and the scanner (and I would assume any other pieces you have - we only have scanner and SP right now.) [Ballerini, Jean Paul (ISS EMEA)] MU only needs one valid license. When you start it, it will check if it is still valid and then run. HTH. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer The University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/~pauls/ _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to https://atla-mm1.iss.net/mailman/listinfo