[
https://issues.apache.org/jira/browse/CLOUDSTACK-2008?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=13629777#comment-13629777
]
Marcus Sorensen commented on CLOUDSTACK-2008:
---------------------------------------------
Ok, so if I understand correctly (and I don't think I do), you set up a zone
without specifying the "traffic label" for the guest traffic, and cloudstack
created cloudVirBr70 for you for guest traffic, then later you added another
guest network and then set the traffic label to "cloudbr0"? Or can you guide me
through the steps to reproduce?
> guest network vlan tag chain issue
> ----------------------------------
>
> Key: CLOUDSTACK-2008
> URL: https://issues.apache.org/jira/browse/CLOUDSTACK-2008
> Project: CloudStack
> Issue Type: Bug
> Security Level: Public(Anyone can view this level - this is the
> default.)
> Components: Network Controller
> Affects Versions: 4.0.1
> Environment: centos 6.4
> HP BL460 G1
> Reporter: danny webb
> Priority: Minor
>
> Hi,
> I have setup a cloudstack instance where my "root" eth device is a vlan
> tagged bond0.60 (as the network I am on has a different default VLAN id than
> my test vlans).
> so I am setup like this:
> bond0.60 / cloudbr0 == management network / ip of box (bond0 == nothing)
>
> bond0.60 Link encap:Ethernet HWaddr 00:17:A4:77:48:3C
> inet6 addr: fe80::217:a4ff:fe77:483c/64 Scope:Link
> UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
> RX packets:37189 errors:0 dropped:0 overruns:0 frame:0
> TX packets:34030 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:4476334 (4.2 MiB) TX bytes:31055747 (29.6 MiB)
> cloudbr0 Link encap:Ethernet HWaddr 00:17:A4:77:48:3C
> inet addr:172.18.102.8 Bcast:172.18.102.255 Mask:255.255.255.0
> inet6 addr: fe80::217:a4ff:fe77:483c/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:36531 errors:0 dropped:0 overruns:0 frame:0
> TX packets:32606 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:4435824 (4.2 MiB) TX bytes:30976056 (29.5 MiB)
>
> when it went to setup a new guest network (with a vlan id of 80) it created
> it ontop of the bond0.60 like:
>
> bond0.60.80 Link encap:Ethernet HWaddr 00:17:A4:77:48:3C
> inet6 addr: fe80::217:a4ff:fe77:483c/64 Scope:Link
> UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:13777 (13.4 KiB)
>
> [root@slo-cnkvm004 ~]# brctl show
> bridge name bridge id STP enabled interfaces
> cloud0 8000.000000000000 no
> cloudVirBr80 8000.0017a477483c no
> bond0.60.80
>
> which doesn't seem to work and I am pretty sure is syntactically wrong. I
> can't ping any guests that come up on that network. When creating new
> devices it should I believe be creating them off of the base eth device (ie
> eth0, or bond0).
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
