[
https://issues.apache.org/jira/browse/FLINK-8780?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=16474071#comment-16474071
]
ASF GitHub Bot commented on FLINK-8780:
---------------------------------------
Github user kl0u commented on a diff in the pull request:
https://github.com/apache/flink/pull/5922#discussion_r187924456
--- Diff: docs/dev/stream/state/broadcast_state.md ---
@@ -0,0 +1,279 @@
+---
+title: "The Broadcast State Pattern"
+nav-parent_id: streaming_state
+nav-pos: 2
+---
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements. See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership. The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied. See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+
+* ToC
+{:toc}
+
+[Working with State](state.html) describes operator state which upon
restore is either evenly distributed among the
+parallel tasks of an operator, or unioned, with the whole state being used
to initialize the restored parallel tasks.
+
+A third type of supported *operator state* is the *Broadcast State*.
Broadcast state was introduced to support use cases
+where some data coming from one stream is required to be broadcasted to
all downstream tasks, where it is stored locally
+and is used to process all incoming elements on the other stream. As an
example where broadcast state can emerge as a
+natural fit, one can imagine a low-throughput stream containing a set of
rules which we want to evaluate against all
+elements coming from another stream. Having the above type of use cases in
mind, broadcast state differs from the rest
+of operator states in that:
+ 1. it has a map format,
+ 2. it is only available to specific operators that have as inputs a
*broadcasted* stream and a *non-broadcasted* one, and
+ 3. such an operator can have *multiple broadcast states* with different
names.
+
+## Provided APIs
+
+To show the provided APIs, we will start with an example before presenting
their full functionality. As our running
+example, we will use the case where we have a stream of objects of
different colors and shapes and we want to find pairs
+of objects of the same color that follow a certain pattern, *e.g.* a
rectangle followed by a triangle. We assume that
+the set of interesting patterns evolves over time.
+
+In this example, the first stream will contain elements of type `Item`
with a `Color` and a `Shape` property. The other
+stream will contain the `Rules`.
+
+Starting from the stream of `Items`, we just need to *key it* by `Color`,
as we want pairs of the same color. This will
+make sure that elements of the same color end up on the same physical
machine.
+
+{% highlight java %}
+// key the shapes by color
+KeyedStream<Item, Color> colorPartitionedStream = shapeStream
+ .keyBy(new KeySelector<Shape, Color>(){...});
+{% endhighlight %}
+
+Moving on to the `Rules`, the stream containing them should be broadcasted
to all downstream tasks, and these tasks
+should store them locally so that they can evaluate them against all
incoming `Items`. The snippet below will i) broadcast
+the stream of rules and ii) using the provided `MapStateDescriptor`, it
will create the broadcast state where the rules
+will be stored.
+
+{% highlight java %}
+
+// a map descriptor to store the name of the rule (string) and the rule
itself.
+MapStateDescriptor<String, Rule> ruleStateDescriptor = new
MapStateDescriptor<>(
+ "RulesBroadcastState",
+ BasicTypeInfo.STRING_TYPE_INFO,
+ TypeInformation.of(new TypeHint<Rule>() {})
+ );
+
+// broadcast the rules and create the broadcast state
+BroadcastStream<Rule> ruleBroadcastStream = ruleStream
+ .broadcast(ruleStateDescriptor);
+{% endhighlight %}
+
+Finally, in order to evaluate the `Rules` against the incoming elements
from the `Item` stream, we need to:
+ 1) connect the two streams and
+ 2) specify our match detecting logic.
+
+Connecting a stream (keyed or non-keyed) with a `BroadcastStream` can be
done by calling `connect()` on the
+non-broadcasted stream, with the `BroadcastStream` as an argument. This
will return a `BroadcastConnectedStream`, on
+which we can call `process()` with a special type of `CoProcessFunction`.
The function will contain our matching logic.
+The exact type of the function depends on the type of the non-broadcasted
stream:
+ - if that is **keyed**, then the function is a
`KeyedBroadcastProcessFunction`.
+ - if it is **non-keyed**, the function is a `BroadcastProcessFunction`.
+
+ Given that our non-broadcasted stream is keyed, the following snippet
includes the above calls:
+
+<div class="alert alert-info">
+ <strong>Attention:</strong> The connect should be called on the
non-broadcasted stream, with the `BroadcastStream`
+ as an argument.
+</div>
+
+{% highlight java %}
+DataStream<Match> output = colorPartitionedStream
+ .connect(ruleBroadcastStream)
+ .process(
+
+ // type arguments in our
KeyedBroadcastProcessFunction represent:
+ // 1. the key of the keyed stream
+ // 2. the type of elements in the non-broadcast side
+ // 3. the type of elements in the broadcast side
+ // 4. the type of the result, here a string
+
+ new KeyedBroadcastProcessFunction<Color, Item, Rule,
String>() {
+ // my matching logic
+ }
+ )
+{% endhighlight %}
+
+### BroadcastProcessFunction and KeyedBroadcastProcessFunction
+
+As in the case of a `CoProcessFunction`, these methods have two "sides",
one is responsible for processing incoming
+elements in the broadcasted stream and one is used for the non-broadcasted
one. This is reflected in the methods to be
+implemented, which are presented below.
+
+{% highlight java %}
+public abstract class BroadcastProcessFunction<IN1, IN2, OUT> extends
BaseBroadcastProcessFunction {
+
+ public abstract void processElement(IN1 value, ReadOnlyContext ctx,
Collector<OUT> out) throws Exception;
+
+ public abstract void processBroadcastElement(IN2 value, Context ctx,
Collector<OUT> out) throws Exception;
+}
+{% endhighlight %}
+
+{% highlight java %}
+public abstract class KeyedBroadcastProcessFunction<KS, IN1, IN2, OUT> {
+
+ public abstract void processElement(IN1 value, ReadOnlyContext ctx,
Collector<OUT> out) throws Exception;
+
+ public abstract void processBroadcastElement(IN2 value, Context ctx,
Collector<OUT> out) throws Exception;
+
+ public void onTimer(long timestamp, OnTimerContext ctx, Collector<OUT>
out) throws Exception;
+}
+{% endhighlight %}
+
+The first thing to notice is that both functions require the
implementation of the `processBroadcastElement()` method
+for processing elements in the broadcast side and the `processElement()`
for elements in the non-broadcasted side.
+
+The two methods differ in the context they are provided. The non-broadcast
side has a `ReadOnlyContext`, while the
+broadcasted side has a `Context`.
+
+Both of these contexts (`ctx` in the following enumeration):
+ 1. give access to the broadcast state:
`ctx.getBroadcastState(MapStateDescriptor<K, V> stateDescriptor)`
+ 2. allow to query the timestamp of the element: `ctx.timestamp()`,
+ 3. get the current watermark: `ctx.currentWatermark()`
+ 4. get the current processing time: `ctx.currentProcessingTime()`, and
+ 5. emit elements to side-outputs: `ctx.output(OutputTag<X> outputTag, X
value)`.
+
+The `stateDescriptor` in the `getBroadcastState()` should be identical to
the one in the `.broadcast(ruleStateDescriptor)`
+above.
+
+The difference lies in the type of access each one gives to the broadcast
state. The broadcasted side has
+**read-write access** to it, while the non-broadcast side has **read-only
access** (thus the names). The reason for this
+is that in Flink there is no cross-task communication. So, to guarantee
that the contents in the Broadcast State are the
+same across all parallel instances of our operator, we give read-write
access only to the broadcast side, which sees the
+same elements across all tasks, and we require the computation on each
incoming element on that side to be identical
+across all tasks. Ignoring this rule would break the consistency
guarantees of the state, leading to inconsistent and
+often difficult to debug results.
+
+<div class="alert alert-info">
+ <strong>Attention:</strong> The logic implemented in
`processBroadcast()` must have the same determinstic behavior
+ across all parallel instances!
+</div>
+
+Finally, due to the fact that the `KeyedBroadcastProcessFunction` is (on
one "side") operating on a keyed stream, it
+exposes some functionality which is not available to the
`BroadcastProcessFunction`. That is:
+ 1. the `ReadOnlyContext` in the `processElement()` method gives access to
Flink's underlying timer service, which allows
+ to register event and/or processing time timers. When a timer fires, the
`onTimer()` (shown above) is invoked with an
+ `OnTimerContext` which exposes the same functionality as the
`ReadOnlyContext` plus
+ - the ability to ask if the timer that fired was an event or processing
time one and
+ - to query the key associated with the timer.
+
+ This is aligned with the `onTimer()` method of the
`KeyedProcessFunction`.
+ 2. the `Context` in the `processBroadcastElement()` method contains the
method
+ `applyToKeyedState(StateDescriptor<S, VS> stateDescriptor,
KeyedStateFunction<KS, S> function)`. This allows to
+ register a `KeyedStateFunction` to be **applied to all states of all
keys** associated with the provided `stateDescriptor`.
+
+<div class="alert alert-info">
+ <strong>Attention:</strong> Registering timers is only possible at
`processElement()` of the `KeyedBroadcastProcessFunction`
+ and only there. It is not possible in the `processBroadcastElement()`
method, as there is no key associated to the
+ broadcasted elements.
+</div>
+
+Coming back to our original example, our `KeyedBroadcastProcessFunction`
could look like the following:
+
+{% highlight java %}
+new KeyedBroadcastProcessFunction<Color, Item, Rule, String>() {
+
+ // store partial matches, i.e. first elements of the pair waiting for
their second element
+ // we keep a list as we may have many first elements waiting
+ private final MapStateDescriptor<String, List<Item>> mapStateDesc =
+ new MapStateDescriptor<>(
+ "items",
+ BasicTypeInfo.STRING_TYPE_INFO,
+ new ListTypeInfo<>(Item.class));
+
+ // identical to our ruleStateDescriptor above
+ private final MapStateDescriptor<String, Rule> ruleStateDescriptor =
+ new MapStateDescriptor<>(
+ "RulesBroadcastState",
+ BasicTypeInfo.STRING_TYPE_INFO,
+ TypeInformation.of(new TypeHint<Rule>() {}));
+
+ @Override
+ public void processBroadcastElement(Rule value,
+ Context ctx,
+ Collector<String> out) throws
Exception {
+ ctx.getBroadcastState(ruleStateDescriptor).put(value.name, value);
+ }
+
+ @Override
+ public void processElement(Item value,
+ ReadOnlyContext ctx,
+ Collector<String> out) throws Exception {
+
+ final MapState<String, List<Item>> state =
getRuntimeContext().getMapState(mapStateDesc);
+ final Shape shape = value.getShape();
+
+ for (Map.Entry<String, Rule> entry:
+
ctx.getBroadcastState(ruleStateDescriptor).immutableEntries()) {
+ final String ruleName = entry.getKey();
+ final Rule rule = entry.getValue();
+
+ List<Item> stored = state.get(ruleName);
+ if (stored == null) {
+ stored = new ArrayList<>();
+ }
+
+ if (shape == rule.second && !stored.isEmpty()) {
+ for (Item i : stored) {
+ out.collect("MATCH: " + i + " - " + value);
+ }
+ stored.clear();
+ }
+
+ // there is no else{} to cover if rule.first == rule.second
+ if (shape.equals(rule.first)) {
+ stored.add(value);
+ }
+
+ if (stored.isEmpty()) {
+ state.remove(ruleName);
+ } else {
+ state.put(ruleName, stored);
+ }
+ }
+ }
+}
+{% endhighlight %}
+
+## Important Considerations
+
+After describing the offered APIs, this section focuses on the important
things to keep in mind when using broadcast
+state. These are:
+
+ - **There is no cross-task communication:** As stated earlier, this is
the reason why only the broadcast side of a
+`(Keyed)-BroadcastProcessFunction` can modify the contents of the
broadcast state. In addition, the user has to make
+sure that all tasks modify the contents of the broadcast state in the same
way for each incoming element. Otherwise,
+different tasks might have different contents, leading to inconsistent
results.
+
+ - **Order of events in Broadcast State may differ across tasks:**
Although broadcasting the elements of a stream
+guarantees that all elements will go to all downstream tasks, elements may
arrive in a different order on each task.
+This implies that although all tasks will (eventually) have the same
elements in their broadcast state, these may not
+be in the same order.
+
+ - **All tasks checkpoint their state:** Although all tasks have the same
elements when a checkpoint takes place
--- End diff --
Correct. I will include the word "broadcast".
> Add Broadcast State documentation.
> ----------------------------------
>
> Key: FLINK-8780
> URL: https://issues.apache.org/jira/browse/FLINK-8780
> Project: Flink
> Issue Type: Bug
> Components: DataStream API, Documentation, Streaming
> Affects Versions: 1.5.0
> Reporter: Kostas Kloudas
> Assignee: Kostas Kloudas
> Priority: Critical
> Fix For: 1.5.0
>
>
--
This message was sent by Atlassian JIRA
(v7.6.3#76005)
