So your images should always go into the PDF at the highest res you will need to print at.
This may make them large, but when the PDF prints it will print them as good as possible. So unless you are trying to reduce download times or something, don't make two PDF's... you just need the one. -----Original Message----- From: Leonard Rosenthol [mailto:[EMAIL PROTECTED]] Sent: Sunday, June 23, 2002 10:57 PM To: Shahzad Latif; [EMAIL PROTECTED] Subject: Re: [iText-questions] (no subject) At 2:02 AM +0000 6/24/02, Shahzad Latif wrote: >Looking at the tutorial and your classes, I have successfully >created a PDF and am pretty happy to see the end result and ease of >programming. Thanks a lot. Indeed a great contribution. Got a >question: Is it possible to control the resolution of the PDF, i.e., >I want to create a PDF of 300 dpi as well as 600 dpi. Your response >will be the end to my project and I would highly appreciate it. >Thanks in advance. > A PDF is resolution INDEPENDENT - it has no dpi setting. Raster/Bitmap images INSIDE a PDF will have a dpi setting, but that's just a single object not the file at large. And such a dpi setting would be adjusted based on the final output device anyway. Leonard -- --------------------------------------------------------------------------- Leonard Rosenthol <mailto:[EMAIL PROTECTED]> Chief Technical Officer <http://www.pdfsages.com> PDF Sages, Inc. 215-629-3700 (voice) 215-629-0789 (fax) ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ iText-questions mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/itext-questions ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ iText-questions mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/itext-questions
