-------------- Original message ---------------------- From: "Eng. Amgad Hanafy" <[EMAIL PROTECTED]> > > Thank you for your reply >
You're very welcome. > 1- where to get the scaleAndTile application (I couldn't get it from the > link > you provide ) The link I provided has information on how to get it. There is no download link, at present, because it is an application that is under active development. > 2- What if the image is too large to fit in a pdf page (larger than the > allowed > size for pdf page) What image size did you have in mind? IIRC, PDF-1.2 allows up to 45x45 in., while later versions allow up to 200x200 in., according to the book, _iText in Action_, p. 33. I sense from your questions that you do not have the book. If you want to work with PDFs, you really, really should have it. There's a link to the publisher's web site on www.lowagie.com/iText/. Best regards, Bill Segraves ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ iText-questions mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/itext-questions Buy the iText book: http://itext.ugent.be/itext-in-action/
