Hello,

Can you tell me which hw and phone you are using?

Are you also using usb headset?

I can try this out with march release, if I know your setup more precisily...

br,
Jaska
________________________________________
From: IVI [ivi-boun...@lists.tizen.org] on behalf of Kirankumar Mahajan 
[kirankumar.maha...@igate.com]
Sent: Sunday, September 21, 2014 9:45 AM
To: ivi@lists.tizen.org
Subject: HFP Audio is not getting routed to USB sound card

Hi,
We are using Intel platform on which we are running March 2014 release.
We are running our Phone Dialer application which similar to Lemolo and uses 
OFONO DBus interfaces to get telephony services.

So after we successfully pair HFP enabled phone to our IVI system with Lemolo 
and with our application we are able to dial to a phone number. We receive the 
phone call on phone to which we are dialing but after accepting the call we are 
not able to hear any sound. Neither from IVI side or nor from the phone to 
which we dialed. We also crosschecked that the phone with which we are pairing 
supports HFP and it is, that is why we are able to make phone call.
But the A2DP sound gets routed to USB sound card properly when we are using out 
IVI system as A2DP sink.

I came across the following reported bugs,
https://bugs.tizen.org/jira/browse/TIVI-2257
https://bugs.tizen.org/jira/browse/TIVI-2257

So did crosschecked whether we have correct firmware on our HW and it is,
ibt-hw-37.7.10-fw-1.80.2.3.d.bseq

which is the correct version which fixes the bug in FW. The case it that we did 
heard HFP audio 1-2 times but we don’t know how it worked that time. Basically 
we followed the same steps apart from trying out with our application and 
Lemolo.

The steps we followed,


1)       Start pulse audio as app user using
#paplay <song>

2)      Pair and connect HFP enabled phone over Bluetooth using

#bluetoothctl

3)      Check the HFP modem using

#/usr/lib/ofono/test/list-modem

4)      Enable modem using

#/usr/lib/ofono/test/enable-modem /hfp/org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx

5)      Then checked the pulse audio sources and sinks after enabling the modem 
using commands

#pactl list sources and #pactl list sinks

6)      Then dialed to a phone number using command,

#/usr/lib/ofono/test/dial-number /hfp/org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx  
$number

After this I receive the call but cannot hear HFP audio. So while call ongoing 
I tried to link sources with sinks using,

#pactl load-module module-loopback source=bluez_source.xx_xx_xx_xx_xx_xx_xx 
sink=alsa-output.usb-C-Media_Electronics_Inc.xxxxx && pactl load-module 
module-loopback sink=bluez_sink.xx_xx_xx_xx_xx_xx_xx source= alsa_input. 
usb-C-Media_Electronics_Inc.xxxxx

After doing this I just hear a noise but not the actual HFP audio.

Can anyone please give some pointers or any information how we can fix this 
issue?

Regards,

Kirankumar Mahajan
Project Lead
---------------------------------------------------------------------------------------------------------------------------------------
[cid:image002.jpg@01CFD595.C0640EE0]<http://www.igate.com/> Level 0,1,2,5 & 6, 
Tower III, Cyber City, Magarpatta City, Hadapsar, Pune 411013 India
Phone: +91 20 3984 2000 Extn 2684 I Cell: +91 860 510 0029 I  
www.igate.com<http://www.igate.com/>
[cid:image005.jpg@01CF6D3C.E6CF3BC0]<https://twitter.com/iGATE_Corp>[cid:image010.png@01CF6D3C.E6CF3BC0]<http://linkd.in/1nvzJai>[cid:image007.png@01CF6D3C.E6CF3BC0]<http://on.fb.me/18eFm3a>[cid:image016.png@01CF6D3C.C33BB850]<http://www.youtube.com/igatechannel>


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com<http://www.igate.com>.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki 
Business Identity Code: 0357606 - 4 
Domiciled in Helsinki 

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
_______________________________________________
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Reply via email to