Le Mardi 4 Octobre 2005 22:58, Hans Verkuil a écrit : > Bonjour! Hello,
> I've just committed r2745 which hopefully fixes SECAM audio. After > going through the datasheet and comparing the windows I2C dumps I > noticed that one setting (FORMAT_65MHZ, reg 0x80B) was set to 0 in > ivtv but it was 1 in the I2C logs. Basically this meant that > NICAM-L was never detected, which explains a thing or two. Yes .... > In my patch I've set this setting to autodetect for PAL and SECAM. > Let's see if this works. You got it ! > If there still is no sound, then try the attached patch for the > tda9887 settings. I hope this is not necessary, though. > > I'm keeping my fingers crossed... Relax your fingers. I can't test stereo mode, Julien ? > Check frequently with ivtvctl --log-status to see what's happening. > It provides a full overview of the video/audio settings in the > kernel log. cx25840 1-0044: Video signal: present cx25840 1-0044: Detected format: SECAM (microcontroller: SECAM) cx25840 1-0044: Detected audio mode: mono cx25840 1-0044: Detected audio standard: AM-L cx25840 1-0044: Audio microcontroller: running cx25840 1-0044: Configured audio standard: automatic detection cx25840 1-0044: Configured audio system: automatic standard and mode detection cx25840 1-0044: Specified standard: SECAM cx25840 1-0044: Specified input: tuner cx25840 1-0044: Specified audio input: tuner cx25840 1-0044: Specified audio rate: 48 kHz cx25840 1-0044: Preferred audio mode: stereo cx25840 1-0044: Selected 65 MHz format: autodetect cx25840 1-0044: Selected 45 MHz format: chroma wm8775 1-001b: Input: default Thank's a lot. -- Jacques Facquet. _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
