I have to apologize because I am committing a cardinal
sin by cross-posting this message I sent to the user
list just under a week ago. Please forgive me - I got
no responses on the list, you all seem so much more
knowlegeable over here, and I'm near my wit's end.
I have a PVR-250 and PVR-350 in my box. I had this
setup running perfectly under FC2 for about a year. I
just did a clean install of FC4 and MythTV via Axel's
RPMs, and everything works except for video playback
on the 350. I encode fine. I can display X on the
framebuffer 350 out fine. But the decoder does not
work.
The problem seems to be this section:
ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
ivtv0: unable to open firmware
ivtv0: failed to read mpeg decoder initialisation file
/lib/modules/ivtv_init_mpeg.bin
I just don't know what to do about it. I tried
uninstalling everything and reinstalling. No dice. I
built from the source. Same problems. I followed all
the directions in the Howto on the ivtvdriver.org site
and tried the troubleshooting steps. Now I am coming
to you all for help. Is there anyone who has some
suggestions for me?
Regards,
Daniel
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.13-1.1532_FC4 686 REGPARM
4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug
info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based)
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK1] ->
GSI 11 (level, low) -> IRQ 11
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48132, rev = K168,
serial# = 2836816
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type =
47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom,
addr=50]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support,
simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Oct 21 2005 02:12:13
ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2,
addr=40]
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7115,
addr=21]
: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset),
addr=61]
saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7127,
addr=44]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: loading /lib/modules/ivtv-fw-dec.bin
ivtv0: Encoder revision: 0x02040024
ivtv0 warning: Encoder Firmware can be buggy, use
version 0x02040011 or 0x02050032.
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200
buffers (1024KB total)
ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
ivtv0: unable to open firmware
ivtv0: failed to read mpeg decoder initialisation file
/lib/modules/ivtv_init_mpeg.bin
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
spurious 8259A interrupt: IRQ7.
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ====================== NEXT CARD
======================
ivtv1: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] ->
GSI 5 (level, low) -> IRQ 5
ivtv1: Unreasonably low latency timer, setting to 64
(was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 32552, rev = C168,
serial# = 7245929
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type =
47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv1: i2c attach to card #1 ok [client=tveeprom,
addr=50]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-B3, has NICAM support,
simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Oct 21 2005 02:12:13
ivtv1: i2c attach to card #1 ok [client=MSP3448W-B3,
addr=40]
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver
#1)
ivtv1: i2c attach to card #1 ok [client=saa7115,
addr=21]
: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=(tuner unset),
addr=61]
ivtv1: loading /lib/modules/ivtv-fw-enc.bin
ivtv1: Encoder revision: 0x02040024
ivtv1 warning: Encoder Firmware can be buggy, use
version 0x02040011 or 0x02050032.
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv1: Create encoder radio stream
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
ivtv1: Initialized WinTV PVR 250, card #1
ivtv: ==================== END INIT IVTV
====================
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
