This may have been one of the tests you did already, in which case I
apologize for asking this again, but if you install a uni-processor
kernel, does it work then? In that case it's almost certainly smp
related which isn't very well tested. If it also fails, then smp has
nothing to do with this and the cause is something else.
Hans
On Sunday 13 November 2005 20:19, Steve & Laurie Sanders wrote:
> Never mind, 0.8.0 just froze too. No improvement for me. generated
> this in messages:
> Nov 13 11:07:56 mediacenter kernel: ivtv0 warning: DEC: Decoder wants
> 0x00010000 bytes, bad memory location 0x00010000.
> Nov 13 11:07:59 mediacenter last message repeated 1847 times
> Nov 13 11:08:07 mediacenter kernel: ivtv0 warning: DEC: Decoder
> Invalid type 0x061c8202?
> Nov 13 11:08:07 mediacenter last message repeated 4764 times
> Nov 13 11:08:12 mediacenter kernel: ivtv0 warning: DEC: Decoder
> Invalid type 0x02000000?
>
> As before I was able to resume playback by pressing ff then play.
> jumpback works too. probably any keypress that re-grabs the stream
> from a slightly different index.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Steve & Laurie
> Sanders
> Sent: Sunday, November 13, 2005 10:21 AM
> To: Discussion list for development of the IVTV driver
> Subject: RE: [ivtv-devel] ivtv framebuffer is broken with PVR350
>
>
> Thanks for the info, do you have any idea how I can pull down source
> for this version 0.8.0? is it available through svn? or elswhere? I
> would like to give it a try.
>
> I could probably live with the freezing, it is annoying but not
> intolerable. But I accumulate 10s of MB of message logging very
> quickly!
>
> Steve
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of John-Marc
> Chandonia
> Sent: Sunday, November 13, 2005 9:30 AM
> To: Discussion list for development of the IVTV driver
> Subject: Re: [ivtv-devel] ivtv framebuffer is broken with PVR350
>
>
> I have similar problems with the current ivtvdev X driver (0.10.6),
> and I'm not on a SMP system.
>
> I'm using the module that reports itself as 0.8.0 (size 16025 bytes)
> with ivtv 0.4.0 and it works fine. I didn't try any intermediate
> versions (they don't seem to be available), so I can't say when it
> broke.
>
> JMC
> --
> John-Marc Chandonia ([EMAIL PROTECTED])
> http://www.dolorespark.org/
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
