On Sun, Nov 13, 2005 at 10:10:16AM +0100, Hans Verkuil wrote:
> On Sunday 13 November 2005 05:09, Rod wrote:
> > Greetings,
> >
> > I didn't get any response from ivtv-users so I'm hoping that there
> > may be an answer here.  I am at the end of my rope having gone over
> > all the documentation, FAQ's and lists.
> >
> > I am having trouble configuring sound with a dual input setup.
> >
> > I have installed a PVR-250 and PVR-350 individually and they both
> > work fine by themselves.  When I put both cards in at the same time,
> > I lose sound on the PVR-250.
> >
> > I am using ivtvdriver 0.4.0 and have been following Jarrod's
> > instructions.  I am using Fedora Core 4
> >
> > Here is my lspci -v output for the cards and sound
> >
> <snip>
> >
> > Any direction on where I go from here would be greatly appreciated.
> 
> I'd recommend trying ivtv-0.5.0 first: it replaces the msp3400 driver 
> with a newer version from v4l. You should remove these lines:
> 
> alias tveeprom tveeprom-ivtv
> alias tuner tuner-ivtv
> alias tda9887 tda9887-ivtv
> alias msp3400 msp3400-ivtv
> 
> and also make sure all ivtv versions of these modules are removed (or it 
> will pick up the wrong one).

Here is the debug info with 0.5.0.  PVR350 gives sound, PVR-250 still
does not.

"lspci -v"

Snipp....

01:00.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 
Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-350
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at ec000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

01:01.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) 
MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

" dmesg output"

Nov 14 23:31:48 mythbox kernel: ivtv:  ==================== START INIT IVTV 
====================
Nov 14 23:31:48 mythbox kernel: ivtv:  version 0.4.0 (tagged release) loading
Nov 14 23:31:48 mythbox kernel: ivtv:  Linux version: 2.6.13-1.1532_FC4 686 
REGPARM 4KSTACKS gcc-4.0
Nov 14 23:31:48 mythbox kernel: ivtv:  In case of problems please include the 
debug info
Nov 14 23:31:48 mythbox kernel: ivtv:  between the START INIT IVTV and END INIT 
IVTV lines when
Nov 14 23:31:48 mythbox kernel: ivtv:  mailing the ivtv-devel mailinglist.
Nov 14 23:31:48 mythbox kernel: ivtv0: Autodetected WinTV PVR 350 card (iTVC15 
based)
Nov 14 23:31:48 mythbox kernel: PCI: Enabling device 0000:01:00.0 (0014 -> 0016)
Nov 14 23:31:48 mythbox kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 
11
Nov 14 23:31:48 mythbox kernel: PCI: setting IRQ 11 as level-triggered
Nov 14 23:31:48 mythbox kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link 
[LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 14 23:31:48 mythbox kernel: tveeprom: The eeprom says no radio is present, 
but the tuner type 68
Nov 14 23:31:48 mythbox kernel: tveeprom: indicates otherwise. I will assume 
that radio is present.
Nov 14 23:31:48 mythbox kernel: tveeprom: ivtv version
Nov 14 23:31:48 mythbox kernel: tveeprom: Hauppauge: model = 48132, rev = K268, 
serial# = 8207794
Nov 14 23:31:48 mythbox kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, 
type = 47)
Nov 14 23:31:48 mythbox kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, 
v4l2 = 0x00001000)
Nov 14 23:31:48 mythbox kernel: tveeprom: audio processor = MSP4448 (type = 1b)
Nov 14 23:31:48 mythbox kernel: tveeprom: decoder processor = SAA7115 (type = 
13)
Nov 14 23:31:48 mythbox kernel: ivtv0: i2c attach to card #0 ok 
[client=tveeprom, addr=50]
Nov 14 23:31:48 mythbox kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus 
ivtv i2c driver #0
Nov 14 23:31:48 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=(tuner 
unset), addr=61]
Nov 14 23:31:48 mythbox kernel: saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c 
driver #0)
Nov 14 23:31:48 mythbox kernel: ivtv0: i2c attach to card #0 ok 
[client=saa7115, addr=21]
Nov 14 23:31:48 mythbox kernel: saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c 
driver #0)
Nov 14 23:31:48 mythbox kernel: ivtv0: i2c attach to card #0 ok 
[client=saa7127, addr=44]
Nov 14 23:31:48 mythbox kernel: msp34xx: ivtv version
Nov 14 23:31:48 mythbox kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM 
support, simple (D) mode, simpler (G) no-thread mode
Nov 14 23:31:48 mythbox kernel: msp34xx: $Id$ compiled on: Nov 12 2005 18:05:10
Nov 14 23:31:48 mythbox kernel: ivtv0: i2c attach to card #0 ok 
[client=MSP3448W-A2, addr=40]
Nov 14 23:31:48 mythbox kernel: tda9885/6/7: (ivtv) chip found @ 0x86
Nov 14 23:31:48 mythbox kernel: ivtv0: i2c attach to card #0 ok 
[client=tda9887, addr=43]
Nov 14 23:31:48 mythbox kernel: ivtv0: loading /lib/modules/ivtv-fw-enc.bin
Nov 14 23:31:48 mythbox kernel: ivtv0: loading /lib/modules/ivtv-fw-dec.bin
Nov 14 23:31:49 mythbox kernel: ivtv0: Encoder revision: 0x02050032
Nov 14 23:31:49 mythbox kernel: ivtv0: Decoder revision: 0x02020023
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 
32768 buffers (4096KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 
10800 buffers (2048KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 
17472 buffers (2048KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA encoder PCM audio stream: 
455 x 4608 buffers (2048KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: Create encoder radio stream
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 
65536 buffers (1024KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 
2048 buffers (1024KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: Create decoder VOUT stream
Nov 14 23:31:49 mythbox kernel: ivtv0: Allocate DMA decoder YUV stream: 24 x 
43200 buffers (1024KB total)
Nov 14 23:31:49 mythbox kernel: ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
Nov 14 23:31:49 mythbox kernel: tuner: type set to 47 (LG NTSC (TAPE series)) 
by ivtv i2c driver #0
Nov 14 23:31:49 mythbox kernel: ivtv0: Initialized WinTV PVR 350, card #0
Nov 14 23:31:49 mythbox kernel: ivtv:  ======================  NEXT CARD  
======================
Nov 14 23:31:49 mythbox kernel: ivtv1: Autodetected WinTV PVR 250 card (iTVC16 
based)
Nov 14 23:31:49 mythbox kernel: PCI: Enabling device 0000:01:01.0 (0014 -> 0016)
Nov 14 23:31:49 mythbox kernel: ACPI: PCI Interrupt 0000:01:01.0[A] -> Link 
[LNKC] -> GSI 10 (level, low) -> IRQ 10
Nov 14 23:31:49 mythbox kernel: tveeprom: ivtv version
Nov 14 23:31:49 mythbox kernel: tveeprom: Hauppauge: model = 32062, rev = B185, 
serial# = 7369525
Nov 14 23:31:49 mythbox kernel: tveeprom: tuner = TCL 2002N 6A (idx = 85, type 
= 50)
Nov 14 23:31:49 mythbox kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, 
v4l2 = 0x00001000)
Nov 14 23:31:49 mythbox kernel: tveeprom: audio processor = MSP3445 (type = c)
Nov 14 23:31:49 mythbox kernel: tveeprom: decoder processor = SAA7115 (type = 
13)
Nov 14 23:31:49 mythbox kernel: ivtv1: i2c attach to card #1 ok 
[client=tveeprom, addr=50]
Nov 14 23:31:49 mythbox kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus 
ivtv i2c driver #1
Nov 14 23:31:49 mythbox kernel: ivtv1: i2c attach to card #1 ok [client=(tuner 
unset), addr=61]
Nov 14 23:31:49 mythbox kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c 
driver #1)
Nov 14 23:31:49 mythbox kernel: ivtv1: i2c attach to card #1 ok 
[client=saa7115, addr=21]
Nov 14 23:31:49 mythbox kernel: msp34xx: ivtv version
Nov 14 23:31:49 mythbox kernel: msp34xx: init: chip=MSP3445G-B8, has NICAM 
support, simple (D) mode, simpler (G) no-thread mode
Nov 14 23:31:49 mythbox kernel: msp34xx: $Id$ compiled on: Nov 12 2005 18:05:10
Nov 14 23:31:49 mythbox kernel: ivtv1: i2c attach to card #1 ok 
[client=MSP3445G-B8, addr=40]
Nov 14 23:31:49 mythbox kernel: ivtv1: loading /lib/modules/ivtv-fw-enc.bin
Nov 14 23:31:49 mythbox kernel: ivtv1: Encoder revision: 0x02050032
Nov 14 23:31:49 mythbox kernel: ivtv1: Allocate DMA encoder MPEG stream: 128 x 
32768 buffers (4096KB total)
Nov 14 23:31:49 mythbox kernel: ivtv1: Allocate DMA encoder YUV stream: 194 x 
10800 buffers (2048KB total)
Nov 14 23:31:49 mythbox kernel: ivtv1: Allocate DMA encoder VBI stream: 120 x 
17472 buffers (2048KB total)
Nov 14 23:31:49 mythbox kernel: ivtv1: Allocate DMA encoder PCM audio stream: 
455 x 4608 buffers (2048KB total)
Nov 14 23:31:49 mythbox kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c 
driver #1
Nov 14 23:31:49 mythbox kernel: ivtv1: Initialized WinTV PVR 250, card #1
Nov 14 23:31:49 mythbox kernel: ivtv:  ====================  END INIT IVTV  
====================

### modprobe.conf file

alias usb-controller uhci-hcd
# Lirc top Section
alias char-major-61 lirc_i2c

# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
options ivtv debug=16
# Lirc Bottom Section
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c
# MadWifi
alias ath0 ath_pci
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-intel8x0
# module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias eth0 3c59x

Any thoughts on how I should proceed?

Rod

> 
> If that doesn't help, then load msp3400 with the option 'debug=16' and 
> run again. Mail me the output.
> 
> Does it matter in which PCI slots you put the cards? Are both cards 
> using the antenna input or are you using the S-Video or Composite video 
> inputs?
> 
> The reason you cannot find anything about your problem is probably 
> because you are the only one who has it. I cannot remember seeing this 
> before.
> 
>       Hans
> 
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel

-- 
Rod 
rod451 @ gmx.net

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to