On Sunday 20 November 2005 18:52, Sigurd Nes wrote:
> Martin Dauskardt wrote:
> > Yesterday I downloaded a tarball from the 0.4 branch. I managed to
> > solve the firmware changes, but when I switch to an analog channel
> > on vdr , a message "channel not available" appears. But I can
> > confirm that ivtv and its firmware is succesfully loaded. I tried
> > another vdr plugin for the PVR (ptv) and this works. But when I zap
> > through the channels, the following error often occurs and vdr
> > restarts:
> >
> > Nov 19 22:12:51 linvdr user.info vdr[4222]: switching to channel 98
> > Nov 19 22:12:51 linvdr user.debug vdr[4267]: transfer thread ended
> > (pid=4267, tid=15368)
> > Nov 19 22:12:51 linvdr user.debug vdr[4268]: receiver on device 5
> > thread ended (pid=4268, tid=16393)
> > Nov 19 22:12:51 linvdr user.debug vdr[4222]: cTS2PES got 0 TS
> > errors, 92 TS continuity errors
> > Nov 19 22:12:51 linvdr user.debug vdr[4222]: cTS2PES got 0 TS
> > errors, 82 TS continuity errors
> > Nov 19 22:12:51 linvdr user.debug vdr[4222]: buffer stats: 559676
> > (26%) used Nov 19 22:12:51 linvdr user.warn kernel: tuner 97
> > 402c5639 Nov 19 22:12:51 linvdr user.debug vdr[4270]: transfer
> > thread started (pid=4270, tid=18440)
> > Nov 19 22:12:51 linvdr user.debug vdr[4271]: receiver on device 5
> > thread started (pid=4271, tid=19465)
> > Nov 19 22:12:57 linvdr user.info kernel: ACPI: PCI interrupt for
> > device 0000:00:0a.0 disabled
> > Nov 19 22:12:57 linvdr user.info kernel: ivtv0: Removed WinTV PVR
> > 250, card #0
> >
> > I have never seen the last two lines before!
> >
> > When I switch back to an ivtv-0.4 subversion from the end of
> > october, this problem does not exist. And pvrinput works also.
> >
> > The stable 0.4 branch was described that it "generally only
> > contains minor fixes". It looks like as if there have been some
> > more important changes. Where can I find a detailled description
> > about the current changes of the last two weeks?
> >
> > How can I download a 0.4 tarball with the development status from
> > 29.10.05 ?
>
> I have the same problem: Everything loads fine and all tuners are
> initialized - but the 500 only gives me a short burst of static.
> The 350 is fine.
>
> 04 from 29.10.05 - try this:
> svn co http://ivtvdriver.org/svn/ivtv/branches/0.4 --revision
> {2005-10-29}
>
> Regards
>
> Sigurd
Can you try to find where it broke? Useful dates to try first are 11-11
and 11-15. Once I know in which revision it broke I should be able to
fix it quickly. Thanks!
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
