An update, I have contacted the cable company about the shocking wire. They, of course, will get back to me.
Also, the firmware didn't fix the buzzing. Does anyone know if I have any other options? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brad Barnett Sent: Friday, November 25, 2005 8:47 AM To: Discussion list for development of the IVTV driver Subject: Re: [ivtv-devel] buzzing sound. On Thu, 24 Nov 2005 23:46:57 -0500 "Brent Kilgore" <[EMAIL PROTECTED]> wrote: > I am still having the buzzing channel problem. Whenever something > bright hits the screen it bleeds into the audio channel. This started > when I upgraded to 4.0 (which appears to have permanently broke my cards > ability to auto detect audio mode. Even when downgrading as far as 2.0 > line. I have it set manually to mode 0x020 that I scavenged from an > earlier log. Without it half the channels have no sound. ) the buzzing > still exists with the earlier driver versions also. > > I upgraded to the new recommended firmware, it still won't autodetect > audio mode. I am still checking for buzzing. It APPEARS to be better at > the moment, but all the local origination programming (when it appears > the worse) has gone off the air for the night. > > I have also attached the card directly to the outside cable line with > same buzzing (and autodetect) problem. > > Also, is it normal to be able to pull 17vac off the shielding of a > disconnected main tv cable? I get about 6v off the pin. Reason I > checked it is because it was giving me a nice tingle handling the raw > wire. I forgot to check the potential from pin to shielding. > Either your house or the cable connection is likely not grounded correctly. You have a serious PE difference here! > By main TV cable I mean the cable they run from the junction box not the > pole. I removed all splitters and other devices from wire is what I > mean. > > This driver has come a long way in a short time and I highly appreciate > your work. I just wish I could find a way to help the project more. > > Thanks for your help. > Brent > > > PS. There has been a lot of changes recently with the structure of the > driver's distribution and compile methods and I have been out of the > loop for quite a while. Can someone forward me to a page that can sort > of give me a "conversion manual" for the driver install process? thanks > > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
