Just to chime in, I am also having this problem with my PVR-250 and the latest stable release. I also assumed that my PVR-250 was dying, maybe it is I simply don't know. I will try and roll back to the old stable version and see if it works better.
btw, I also have 2 PVR-350s, one of them nearly as old and it does not have this problem. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (tagged release) loading ivtv: Linux version: 2.6.12 PENTIUM4 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x2570 vendor: 0x8086 tveeprom: Hauppauge: model = 32031, rev = B210, serial# = 6160495 tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3435 (type = 10) ivtv: i2c attach [client=tveeprom,ok] ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00892450, Revi sion 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter SMBus I801 adapter at 0500 (0x0) saa7115: starting probe for adapter ISA main adapter (0x0) saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115,ok] saa7115: status: (1E) 0x48, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3435G-B6, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Nov 2 2005 20:11:36 ivtv: i2c attach [client=MSP3435G-B6,ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 2 tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 1054, itv = 0xe0bf19a0 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
