I have done some investigation but I'm need some insight. I recently bought a new PRV 500. I removed the 150 that I had working and replaced it with a 500. Its in a different slot since the 500 is longer than the 150.
Is the Samsung Tuner supported? Do I need to upgrade my ivtv drivers?
*** /etc/modprobe.conf ***
# ivtv modules setup
alias char-major-81 ivtv
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
# Use following two lines for PVR350 Svideo-Out with frame buffer
# ivtv_dynbuf=0 for reducing lockups
#options saa7127 i2c_enable=1,-1 output_select=1 ivtv_dynbuf=0
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c
# nvidia kernel module
alias char-major-195 nvidia-1_0-7667
alias nvidia nvidia-1_0-7667
alias char-major-81 ivtv
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
# Use following two lines for PVR350 Svideo-Out with frame buffer
# ivtv_dynbuf=0 for reducing lockups
#options saa7127 i2c_enable=1,-1 output_select=1 ivtv_dynbuf=0
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c
# nvidia kernel module
alias char-major-195 nvidia-1_0-7667
alias nvidia nvidia-1_0-7667
ivtv:
==================== START INIT IVTV ====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based)
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7875964
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Nov 24 2005 07:31:45
ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv0: i2c attach to
card #0 ok [client=tda9887, addr=43]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: loading /lib/modules/ivtv-fw-dec.bin
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
automount startup succeeded
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23552, rev = D487, serial# = 8757685
tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 4)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
TEA5767 detected.
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]
tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
type set to 62 (Philips TEA5767HN FM Radio)
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
ivtv1: This is the first unit of a PVR500
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok
[client=wm8775, addr=1b]
ivtv1: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv1: loading /lib/modules/ivtv-fw-enc.bin
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv1: Create encoder radio stream
tuner: type set to 4 (NoTuner) by ivtv i2c driver #1
ivtv1: Initialized WinTV PVR 500 (unit #1), card #1
ivtv: ====================== NEXT CARD ======================
ivtv2: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
ivtv2:
Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23552, rev = D487, serial# = 8757685
tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 4)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61]
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
cx25840 2-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44]
wm8775 2-001b: chip found @ 0x36 (ivtv i2c
driver #2)
ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b]
ivtv2: This is the second unit of a PVR500
ivtv2: Correcting tveeprom data: no radio present on second unit
ivtv2: loading /lib/modules/ivtv-fw-enc.bin
ivtv2: Encoder revision: 0x02050032
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 4 (NoTuner) by ivtv i2c driver #2
ivtv2: Initialized WinTV PVR 500 (unit #2), card #2
ivtv: ==================== END INIT IVTV ====================
Any help is appreciated.
Steve
Myth 0.18.1
ivtv 4.0
Fedora Core 3
5200 Nvidia Svideo Out
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
