Hello, I'm trying to compile 0.4-svn on an amd64 Gentoo 2.6.15 system. It compiles alright but doing modprove ivtv gives:
==================== START INIT IVTV ==================== version 0.4.2 (development revision 3098) loading Linux version: 2.6.15-gentoo SMP gcc-3.4 In case of problems please include the debug info between the START INIT IVTV and END INIT IVTV lines, along with any module options, when mailing the ivtv-users mailinglist. Autodetected WinTV PVR 150 card (cx23416 based) Failed to load module tveeprom i2c client addr: 0x50 not found for command 0x0! Error -19 reading Hauppauge eeprom. Possible causes: the tveeprom module was not loaded, or the eeprom kernel module was loaded before the tveeprom module. Failed to load module tuner Failed to load module cx25840 i2c client addr: 0x44 not found for command 0xc008561c! Failed to load module wm8775 Failed to load module tda9887 Could not detect tuner standard, defaulting to NTSC. loaded /lib/modules/v4l-cx2341x-enc.fw firmware (262144 bytes) Encoder revision: 0x02050032 Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) i2c client addr: 0x44 not found for command 0x40085618! i2c client addr: 0x44 not found for command 0xc0045627! i2c client addr: 0x1b not found for command 0x40046d11! i2c client addr: 0x44 not found for command 0x40046d11! i2c client addr: 0x00 not found for command 0x40085618! i2c client addr: 0x44 not found for command 0x40085618! i2c client addr: 0x44 not found for command 0xc008561c! i2c client addr: 0x44 not found for command 0x40045613! i2c client addr: 0x00 not found for command 0x402c5639! i2c client addr: 0x1b not found for command 0x402c5639! i2c client addr: 0x44 not found for command 0x402c5639! i2c client addr: 0x44 not found for command 0x40045612! i2c client addr: 0x44 not found for command 0xc008561c! Initialized WinTV PVR 150, card #0 ==================== END INIT IVTV ==================== About the modules that fails to load, they don't exist. I see source code for them in the driver/ directory but they are not compiled/installed with make and make install. Are these supposed to be in the kernel from now on or what? Searching the system for suitable files finds this: usr/src/linux-2.6.15-gentoo/drivers/media/video/tveeprom.c usr/src/linux-2.6.15-gentoo/include/media/tveeprom.h usr/src/linux-2.6.15-gentoo/drivers/media/video/tuner-core.c usr/src/linux-2.6.15-gentoo/drivers/media/video/tuner-3036.c usr/src/linux-2.6.15-gentoo/drivers/media/video/tuner-simple.c usr/src/linux-2.6.15-gentoo/include/media/tuner.h usr/src/linux-2.6.15-gentoo/include/config/tuner usr/src/linux-2.6.15-gentoo/drivers/media/video/cx25840 usr/src/linux-2.6.15-gentoo/drivers/media/video/cx25840/cx25840-core.c usr/src/linux-2.6.15-gentoo/drivers/media/video/cx25840/cx25840.h usr/src/linux-2.6.15-gentoo/drivers/media/video/cx25840/cx25840-firmware.c usr/src/linux-2.6.15-gentoo/drivers/media/video/cx25840/cx25840-vbi.c usr/src/linux-2.6.15-gentoo/drivers/media/video/cx25840/cx25840-audio.c usr/src/linux-2.6.15-gentoo/drivers/media/video/wm8775.c usr/src/linux-2.6.15-gentoo/drivers/media/video/tda9887.c However, I cannot find the appropriate kernel options to enable in menuconfig. Any advice? Best regards, Rickard Borgmäster Sweden Hans Verkuil wrote: > Hi all, > > I've started off 0.4.2 by applying the i2c patch from Mark Weaver > (ticket #29). I'd like people to try the 0.4.2 from svn whether or not > you have a IR blaster. > > Thanks, > > Hans > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
